EN  |  DESP

Products

EOL Products

PEG4T

Quad Port Copper Gigabit Ethernet TOE PCI Express Server Adapter Broadcom® Based

This product has been discontinuedEOL Notification

Silicom PCI Express TOE server adapters are network interface cards that contain multiple / single independent Gigabit Ethernet port/s. The Silicom PCI Express TOE server adapters provide a fully integrated up to Layer 5 solution along with a complete Gigabit Ethernet port/s.

Silicom Gigabit Ethernet PCI Express TOE server adapters are Silicom’s third -generation solution for high performance server network application.

Silicom Gigabit Ethernet PCI Express TOE server adapters are based on Broadcom TOE controller features an industry first support for single chip TOE Gigabit Ethernet NIC with TCP / IP offload Engine, RDMA NIC (RNIC)*, iSCSI 1.0* /iSER HBA*.

TCP Offload Engine

The Silicom TOE server adapters include dedicated hardware and processors to process the frame that traverse it functionality. On the transmit path, the TOE controller Copied the data directly from the highest hierarchy of buffers available, execute the TCP/IP, adds lower level headers. On the receive, path, the TOE controller process frame up to the highest layer supported present in the frame, removes lower level headers, posts the data directly to application buffers. The transmit and the receive TOE functionality relieves the host CPI from the from these time consuming operations.

Convergence NIC

The Silicom Gigabit Ethernet PCI Express TOE server adapters enable convergence of all networked communication possible in a server, such as data network (LAN), storage network, or file ( CIFS / NFS), clustering for high performance commuting or inter process communication by support of RDMA* over TCP. The Silicom TOE server adapter is a convergence networking interface card and allows one network connection to provide access to all information types.

Silicom TOE Gigabit Ethernet server adapters can simultaneously support the following functions:

• TOE Chimney- enabled network accelerator

• RDMA Network Interface Controller ( RNIC)*

• iSCSI or iSER Host Bus Adapter ( HBA) *

Reliability, Availability, Serviceability

Silicom Gigabit Ethernet PCI Express TOE server adapters enables fault-tolerant via teaming. Traffic from the failed port is routed through up to seven other members of the team.

Silicom Gigabit Ethernet PCI Express TOE server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

PEG4T

Quad Port Copper Gigabit Ethernet TOE PCI Express Server Adapter Broadcom® Based

TCP offload Engine:

  • Full fast path TCP offload for up to 1024 connection.
  • Zero Copy capable hardware.

iSCSI Controller*:

  • iSCSI initiator
  • iSER ( iSCSI over RDMA)

RDMA Controller ( RNIC)*:

  • RDMA over TCP (iWARP) – RDMAC 1.0 compliant
  • Hardware-based data placement in application buffers without CPU intervention ( user and kernel modes)

Performance Features:

  • Full fast path TCP offload Extremely Low CPU utilization for TCP/IP applications – Host CPU is free to run application code.
  • Accelerated IP based storage*
  • Lower CPU utilization for file level storage protocol such as CIFS and NFS
  • iSCSI functionality with low CPU utilization
  • RDMA support for data placement in application buffers reduces CPU utilization and lower data transits latencies.*
  • Receive Side Scaling (RSS)
  • TCP, IP checksum
  • TCP segmentation
  • Adaptive Interrupts
  • Message Signal Interrupts ( MSI)
  • Host Interface standard support PCI Express 1.1.
  • High performance, reliability, and low power use in Broadcom TOE MAC + PHY / SERDES chip controller
  • Server class reliability, availability and performance features:
    • Link Aggregation and Load Balancing:
    • Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
    • Switch and NIC Independent
    • Failover
  • Ultra deep packet buffer per channel lowers CPU utilization.
  • Virtual LANs –802.1q VLAN tagging.
  • Jumbo Frame (9KB).
  • 802.x flow control.
  • Boot ROM embedded or optional can be used for Boot ROM applications.
  • PCI Power Management Interface (v1.1)
  • Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
  • LEDs indicators for link/Activity/Speed status

PEG4T

Quad Port Copper Gigabit Ethernet TOE PCI Express Server Adapter Broadcom® Based

Copper Gigabit Ethernet Technical Specifications - (1000Base-T) Adapters:

IEEE Standard / Network topology: Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex:Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation: Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s
Data Transfer Rate:1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port.
2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port.
Cables and Operating distance: 10Base-T Category 3, 4, or 5 maximum 100m *
100Base-Tx Category 5 maximum 100m *
1000Base-T Category 5E maximum 100m *

Operating Systems Support

Operating system support: Windows 2000
Windows Server 2003
Linux
Netware
Unix:
SCO Open Server
UnixWare / Open UNIX 8
Solaris

General Technical Specifications

Interface Standard:PCI Express Base Specification Revision 1.0a
Board Size: Low profile Short PCI Add in card 167.64mm X 68.91 mm 6.6" X 2.713"
PCI Express Card Type:X8 Lane
PCI Express Voltage:+3.3V +- 9% + 12V+-8%
PCI Connector: X8 Lane
Controller: Broadcom BCM5709C
Holder:Metal Bracket
Weight:120gr (4.233 oz)
Power Consumption:10.06W, 0.72A at 12V and 0.43A at 3.3V: Typical all ports operate at 1000Mbit/s.
8.74W, 0.61A at 12V and 0.43A at 3.3V: Typical all ports operate at 100Mbit/s.
8.26W, 0.57A at 12V and 0.43A at 3.3V: Typical all ports operate at 10Mbit/s.
8.50W, 0.59A at 12V and 0.43A at 3.3V: Typical No link at all ports
Operating Temperature: 0°C – 50°C (32°F - 122°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF*:99 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 15°C above the system ambient temperature was assumed for the cards components

LEDs

LEDs:(2) LEDs per port
Activity Led:
Blinks on activity (green).
Speed (Bi-color) Led:
1000Mbit/s: Turns on Yellow
100Mbits/s: Turns on Green.
10Mbit/s: Turns off
LEDs location:LEDs are integrated on RJ-45 connector
Connectors:Shielded RJ-45

PEG4T

Quad Port Copper Gigabit Ethernet TOE PCI Express Server Adapter Broadcom® Based

P/N

Description

Notes

PEG4T-RoHSQuad Port Copper Gigabit Ethernet TOE PCI Express Server AdapterBased on Broadcom BCM5709C,
* iSCSI, iSER and RDMA are not supported

 

Model P/N /S/-LP /

S: Solaris:

-LP: Assemble Low Profile Metal Bracket*iSCSI, iSER ,RDMA and FCoE are not released.

1V3

FacebookTwitterLinkedIn
YouTube Channel