x86 Open Appliances
Data Center NA226400
Silicom Hybrid Networking Application Switch Data Center
Silicom Hybrid Application Switch is a network appliance platform based on Intel Server architecture and network switch.
The Silicom Application Switch Data Center is based on a dual socket server mother board and Intel® FM6000 switch engine.
The Silicom application switch unique architecture is based on standard server sand switch in a system.
Data Center NA226400
Silicom Hybrid Networking Application Switch Data Center
Key Features:
- Integrates server capabilities together with a top of the rack switch
- Front connectivity: Supports up to 48x 10G IO port
- Provides Intel® x86 processor and network switching in a standard rack mount server
- Enables unparalleled connectivity between host and switch
- Hybrid solution that saves a box in the data center
- Saves power and Simple to maintain
- Saves volume in the rack mount
- Saves cabling and routing of cables
- Reduce CAPEX and OPEX
- Silicom API: Easiest “local SW management” (no need to develop on top of an external switch)
- Targeted to standard rack mount servers (2U, 3U, 4U)
- Supports Intel® Alta (67Xx) and Fortville (XL710 PCI E controller)
- Fits any standard M/B with adjacent PCI E slots
- Based on standard server grade reliability
- High versatility with configurable I/O port options
- Up to 640 Gbps Switch capability
- Host interface: up to 5 x 40Gbe thorough PCI Express Gen 3.0 (8Gbps) X8 lanes
Switch performance:
- Up to 72x10GbE or 18 x40GbE ports, up to 640 Gbps BW
- KR4, KR, XFI, XLPPI interfaces
Layer 2:
- 64K-entry MAC table
- Efficient MAC table utilization with 16-way hash
- 64-port LAG filtering
- 36K multicast groups with wire-speed replication
- Multiple Spanning Tree support
- Independent and shared VLAN learning
Layer 3:
- IPv4, IPv6 lookups
- Up to 64K IPv4 entries or up to 16K IPv6 entries
- Fully-provisioned IP multicast routing
- CEE and DCB support
- QoS and congestion management
- Switch virtualization and scaling
- Security - Port-based security (802.1X), MAC address security
I/O Interfaces:
- 10Gigabit Ethernet: SFP+ connector supporting
- SR: Fiber 10 Gigabit Ethernet 10GBASE-SR
- LR: Fiber 10 Gigabit Ethernet 10GBASE-LR
- XR: Copper 10SFP+Cu (Passive Direct Attach Cable)
Data Center NA226400
Silicom Hybrid Networking Application Switch Data Center
General Technical Specifications | |
| Chassis | 2U |
| Mother Board | SuperMicro X9DRH-IF |
| Power Supply | 2U 980W redundant Power Supply |
| CPU | Dual Socket Intel® Xeon® processor E5-2600and E5-2600 v2 |
| Memory | 16x 240-pin DDR3 DIMM sockets 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| HDD / SSD | Up to two 2.5" SATA HDD or SSD HD in the Front |
| Expansion slots | 1x PCI-E 3.0 x16, free slot for future use 6x PCI-E 3.0 x8, used to connect MB to switch |
| Server remote management | Support for IPMI v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| FANS | 3 Rear FANs |
| I/O | 44 SFP I/O on the front |
| Chassis Dimensions | Height: 3.5" (89mm) Width: 17.2" (437mm) Depth: 26.3" (668mm) |
Data Center NA226400
Silicom Hybrid Networking Application Switch Data Center
P/N | Description | Notes |
| NA226400 | 2U Hybrid Application Switch | 2U chassis X8 Gen3, based on Intel FM6764 640GBps and 5x XL710 Mother board: 1x X9DRH-IF CPU: 2x Intel® Xeon® Processor E5-2690 v2 (25M Cache, 3.00 GHz) Memory: 8x 8GB 1600MHz DDR3 SSD: 1x SOLID STATE DISK, SATA 80G (0~70°C) HDD: 1x 2.5" 500GB SATA HDD PSU: 980W redundant Rack mount rails RoHS Compliant |
1V6
