EN  |  DESP

Products

Programmable FPGA Server Adapter

fb4CGg3@VU series FPGA Card

Quad Port QSFP28 100 Gigabit Xilinx® Virtex Ultrascale

The fb4CGg3@VU/VU+ series is a high performance OEM hardware platform intended for 10/40/25/50/100 Gigabit Ethernet via its quad QSFP28 slots.

The standard configuration is based on the Xilinx® Virtex UltraScale+ VU9P FPGA, to provide ample capacity for the quad QSFP28 interface.
The card is also offered with a variety of different FPGAs to provide flexibility for the intended application – this includes both Virtex Ultrascale and the Virtex Ultrascale+ series from Xilinx.

fb4CGg3 VU FPGA Card

The card is mounted with 2 x 64-bit DDR4 2400MT/s 4GB for a total of 8 GB. In addition to this it features 2 SODIMM sockets for use with DDR4 or QDRII+ modules for low latency applications.

fb4CGg3 VU FPGA NIC

fb4CGg3@VU series FPGA Card

Quad Port QSFP28 100 Gigabit Xilinx® Virtex Ultrascale

  • Xilinx® Virtex UltraScale+ VU9P FPGA (standard configuration)
  • 4 x QSFP28 ports
  • 2 x 64-bit DDR4@2400MT/s
  • 2 x Optional SODIMM
  • Configuration flash RAM for boot images
  • PCIe form-factor: 3/4 length, standard height PCIe
  • On-board power and temperature sensors
  • FPGA controlled link and status LEDs
  • Passive cooling (optional)

fb4CGg3@VU series FPGA Card

Quad Port QSFP28 100 Gigabit Xilinx® Virtex Ultrascale

Network Interface

IEEE standard: IEEE 802.3 10GE, 40GE, 25GE, 100GE
Interfaces:
  • Physical interface: 4 x QSFP28 slots
  • 2 port variant available
  • Supports QSFP+/QSFP28 modules: including fan-out modules for 4x10G/4x25GE per slot, Multimode SR4 (850nm), singlemode LR4 (1310nm), singlemode PSM4 (1310nm), multimode LRM4 (1310 nm), or Direct Attached Copper (Twinax) and others
  • Data rate: 16×10, 4×40, 16×25, 4×100 Gbps

Host Interface

PCI bus:
  • 16 lanes PCIe Gen1/Gen2/Gen3
  • PCIe compliant

General Technical Specifications

Configuration:
  • 16-bit fast parallel programming interface from supporting preprogrammed controller
  • Configuration flash supports two boot images with automatic fallback to fail safe image if first image fails
  • Upload of FPGA configuration to flash via PCIe
  • Support for encrypted FGPA bit file (optional)
On-board Memory:
  • 2 x 64-bit DDR4@2400MT/s 4 GB
  • 2 x Optional SODIMM
  • 64-bit DDR4 @2400MT/s 4 GB
  • 36-bit QDRII+ @1266MT/s 288 Mb
  • 8 MB user configurable space in flash RAM for permanent storage
  • 256 MB Configuration flash RAM for boot images
On-board Clock:
  • PCIe clock: 100 MHz
  • 200 MHz clock
  • 50 MHz clock
  • 161.13 MHz clock
FPGA Details:
  • FPGA Xilinx® Virtex UltraScale+
Environment:
  • Physical dimensions: 3/4 length, standard height PCIe
  • Power consumption: <10W with uninitialized FPGA
  • Operating temperature: 0 – 55°C, 30 – 130°F
  • Operating humidity: 20 – 80%
  • Hardware compliance: RoHS, CE
  • Active cooling (heat sink with fan)
  • Passive cooling (optional)
Additional Board Support:
  • On-board power and temperature sensors
  • Board status LEDs
  • User configurable dual color LED
  • FPGA controlled Link and Activity LED for each port
  • PPS clock synchronization connector
  • PCIe AUX power connector and cable
Additional Intellectual Property Modules:
  • Flash configuration I/F
  • 2×8 lane PCIe
  • DDR4 Memory controller
  • I2C controller
  • SmartNIC framework (optional)
  • Ultra low latency 10GE MAC (optional)
  • TCP-offload engine (optional)
Ordering Example:

fb4CGg3@VU09P-3-SS-1A
4-port card with the following configuration:

  • VU09P Virtex UltraScale+ FPGA
  • Speedgrade -3 (fastest available)
  • 288 Mb x36 SQIVe RAM mounted in SoDimm slot A
  • 288 Mb x36 SQIVe RAM mounted in SoDimm slot B
  • SMA connector for PPS signal on front panel
  • Heat sink with integrated UL/CE approved fan

fb4CGg3@VU series FPGA Card

Quad Port QSFP28 100 Gigabit Xilinx® Virtex Ultrascale

P/N

Description

fb4CGg3@VU080-2-00-1A Virtex UltraScale VU80-2, No SODIMMs
fb4CGg3@VU080-2-DD-1A Virtex UltraScale VU80-2, 2x4GB DDR4 SODIMMs
fb4CGg3@VU125-2-00-1A Virtex UltraScale VU125-2, No SODIMMs
fb4CGg3@VU125-2-DD-1A Virtex UltraScale VU125-2, 2x4GB DDR4 SODIMMs
fb4CGg3@VU190-2-00-1A Virtex UltraScale VU190-2, No SODIMMs
fb4CGg3@VU190-2-DD-1A Virtex UltraScale VU190-2, 2x4GB DDR4 SODIMMs
fb4CGg3@VU07P-2-00-1A Virtex UltraScale+ VU7P-2, No SODIMMs
fb4CGg3@VU07P-2-DD-1A Virtex UltraScale+ VU7P-2, 2x4GB DDR4 SODIMMs
fb4CGg3@VU09P-2-00-1A Virtex UltraScale+ VU9P-2, No SODIMMs
fb4CGg3@VU09P-2-DD-1A Virtex UltraScale+ VU9P-2, 2x4GB DDR4 SODIMMs
fb4CGg3@VU09P-2-RR-1A Virtex UltraScale+ VU9P-2, 2xQDRII RAM (x36, 288Mb)
fb4CGg3@VU09P-3-00-1A Virtex UltraScale+ VU9P-3, No SODIMMs
fb4CGg3@VU09P-3-DD-1A Virtex UltraScale+ VU9P-3, 2x4GB DDR4 SODIMMs
fb4CGg3@VU09P-3-RR-1A Virtex UltraScale+ VU9P-3, 2xQDRII RAM (x36, 288Mb)

 

2V3

FacebookTwitterLinkedIn
YouTube Channel