PE2G4B19L Server Adapter

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom® BCM5719 Based

Silicom’s Quad Port Copper Gigabit Ethernet PCI Express Server adapter is PCI-Express X4 Copper Gigabit Ethernet network interface card that contain Multiple / Single Gigabit port/s on a PCI-Express adapter.

Silicom’s Quad Port Copper Gigabit Ethernet PCI Express Server adapter is designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.

Silicom’s Quad Port Copper Gigabit Ethernet PCI Express Server adapter enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team. Silicom’s Quad Port Copper Gigabit Ethernet PCI Express Server adapter has an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation.

The host processing offloads accelerators frees CPU for application processing. Silicom’s Quad Port Copper Gigabit Ethernet PCI Express Server adapter is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

Silicom’s Quad Port Copper Gigabit Ethernet server adapter is based on Broadcom BCM5719 Quad port Gigabit Ethernet MAC+PHY of Broadcom Controller.

PE2G4B19L Server Adapter

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom® BCM5719 Based

Performance Features:

16 Transmit and 17 Receive queues per port.
Up to 17 queues of Receive Side Scaling (RSS) minimize CPU utilization across multiple processor systems
TSO interleaving for reduced latency
UDP TSO
Minimized device I/O interrupts using MSI and MSI-X
Offload of TCP / IP / UDP checksum calculation and TCP segmentation

Copper Gigabit Ethernet 1000Base-T :

Independently copper Gigabit Ethernet channels support Single Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex
RJ-45 female connectors

Common Key features:

Host Interface standard support PCI-Express Base Specification Revision 2.0
High performance, reliability, and low power use in Broadcom BCM5719 Quad integrated MAC + PHY and SERDES chip Controllers.
Ultra deep, packet buffer per channel lowers CPU utilization
Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation.
Virtual LANs –802.1q VLAN tagging
Jumbo Frame (9.6KB)
802.3x flow control
PCI-SIG SR IOV
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
LEDs indicators for Link/Activity/Speed status

PE2G4B19L Server Adapter

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom® BCM5719 Based

Copper Gigabit Ethernet Technical Specifications - (1000Base-T) Adapters:
IEEE Standard / Network topology:	Gigabit Ethernet, 1000Base-T Fast Ethernet, 100Base-TX Ethernet, 10Base-T
Full duplex / Simplex:	Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation:	Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s.
Data Transfer Rate:	1000 Mb/s, 100 Mb/s and 10 Mb/s in simplex mode per port 2000Mb/s 200 and 20 Mb/s in full duplex mode per port
Cables and Operating distance:	10Base-T Category 3, 4, or 5 maximum 100m 100Base-Tx Category 5 maximum 100m 1000Base-T Category 5E maximum 100m
Operating Systems Support
Operating system support:	Windows Linux
General Technical Specifications
Interface Standard:	PCI-Express Base Specification Revision 2.0 (5 GTs)
Board Size:	Low profile short add-in card: 167.64mm X 68.91mm (6.60”X 2.713”)
PCI Express Card Type:	X4 Lane
PCI Express Voltage:	+12V +- 8%
PCI Connector:	Gold Finger: X4
Controller:	Broadcom BCM5719
Weight:	110 g (3.88 Oz)
Power Consumption:	4.32 W, 0.36 A at 12V: Typical all ports operate at 1000Mb/s. 2.64 W, 0.22 A at 12V: Typical all ports operate at 100Mb/s. 2.16 W, 0.18 A at 12V: Typical all ports operate at 10Mb/s. 1.56 W, 0.13 A at 12V: Typical No link at all ports
Holder:	Metal Bracket: Full Height
Operating Humidity:	0%–90%, non-condensing
Operating Temperature:	0°C – 45°C (32°F - 113°F)
Storage:	-40°C–65°C (-40°F–149°F)
EMC Certifications:	FCC Part 15, Subpart B Class A Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF:	323 (Years) * According to Telcordia SR-332 Issue 2. Environmental condition – GB (Ground, Fixed, and Controlled). Ambient temperature 40°C
LEDs
LEDs:	(2) LEDs per port Link / Act Led: Turn on any Link speed , Blinks on Activity (green) Speed (Bi-color) Led: 1000Mbit/s: Turns on Yellow 100Mbits/s: Turns on Green. 10Mbit/s: Turns off
LEDs location:	LEDs are integrated on RJ-45 connector
Connectors:	(4) Shielded RJ-45