PE410G8I81L Server Adapter

Eight port SFP+ 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter Intel® based

Silicom’s PE410G8I81L 10 Gigabit Ethernet PCI Express server adapter is designed for Servers and high-end appliances.
The PE410G8I81L 10Gigabit Ethernet PCI Express Server adapter provides seamless integration into any PCI Express X16 to 10Gigabit Networks. The performance is optimized to prevent system I/O from being the bottleneck in high-performance networking applications.

The Silicom 10 Gigabit Ethernet PCI Express server adapters are based on Intel® E810-CAM2 Ethernet controller featuring fully integrated 8x 10G Ethernet ports, enhanced programmable packet processing pipeline, virtualization (Enhanced SR-IOV) support with up to 256 VFs, backward compatibility VF driver support.

PE410G8I81L Server Adapter

Eight port SFP+ 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter Intel® based

LAN and Virtualization Features:

10Gbps throughput (each of Tx and Rx)
Parses up to 504B from packet header
768 switch ports (VSIs)
Programmable forwarding rules
Virtualization
- Host virtualization via VMQ and SR-IOV
- 256 SR-IOV Virtual Functions
- Stateless offloads for tunneled packets (network virtualization support)

Host Interface:

PCIe x16 lanes from/to host via gold fingers of edge card.
Support PCI Express Base Specification Revision 4.0, 16GT/s, 8GT/s, 5GT/s or 2.5GT/s

PE410G8I81L Server Adapter

Eight port SFP+ 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter Intel® based

– SFP+ 10Gigabit Ethernet Technical Specifications Adapters:
SFP+ (Small Form-factor Pluggable) supports:	Fiber 10Gigabit Ethernet, 10GBASE-SR (850nm LAN PHY) 10.3125GBd MMF Multi-Mode fiber
– SR: Fiber 10GBASE-SR Ethernet Technical Specifications:
IEEE Standard / Network topology:	Fiber 10Gigabit Ethernet, 100GBase-SR (850nM)
Data Transfer Rate:	103.125GBd
Cables and Operating distance: Up to:	Multimode fiber: 62.5um, (OM4) 100m
Optical Output Power:	Typical: -1.55 dBm Minimum: -8.4 dB *As defined by IEEE 802.3bm
Optical Receive Sensitivity:	Typical: -8.94 dBm Maximum: -5.2 dBm *As defined by IEEE 802.3bm
– LR: Fiber 10GBASE-LR Ethernet Technical Specifications:
IEEE Standard / Network topology:	Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM)
Data Transfer Rate:	103.125GBd
Cables and Operating distance: Up to:	Single Mode: 10km
Operating Systems Support
Operating system support:	Windows Linux FreeBSD VMware
General Technical Specifications
Interface Standard:	PCI-Express Base Specification Revision 4.0 (16 GTs)
Board Size:	Dual-slot, low profile, short add-in card 167.64mm X 68.91mm (6.60”X 2.713”)
PCI Express Card Type:	x16 Lane
PCI Express Voltage:	+12V ± 8%
PCI Connector:	Gold Finger: x16 Lane
Controller:	Intel® E810-CAM2
Holder:	Metal Bracket
Operating Humidity:	0%–90%, non-condensing
Operating Temperature:	0°C – 45°C (32°F – 113°F)
Storage:	-40°C–65°C (-40°F–149°F)
Regulation:	Card shall meet CE, FCC Class B, ROHS requirements.
LEDs
LEDs:	Link: Physical link Speed: Green stay on – physical link on with 10G Speed (Max speed) Off – physical link off. ACT: Logic Link/Activity, Green Green stay on – logic link up, no activity Green blinking – logic link up, activity Off – logic link off
LEDs location:	LEDs are located on the PCB, visible by light guide in the metal bracket.

PE410G8I81L Server Adapter

Eight port SFP+ 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter Intel® based

P/N	Description	Notes
PE410G8I81L-XR	Eight port (SFP+) 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter	RoHS Compliant, Gen4 x 16, based on Intel® E810-CAM2
PE410G8I81L-SR	Eight port Fiber (SR) 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter	RoHS Compliant, Gen4 x 16, based on Intel® E810-CAM2
PE410G8I81L-LR	Eight port Fiber (LR) 10 Gigabit Ethernet PCI Express Gen 4.0 Server Adapter	RoHS Compliant, Gen4 x 16, based on Intel® E810-CAM2