Products

FPGA Cards

FB1C1XLG@A10X0900 FPGA Server Adapter

Programmable PCI Express Server Adapter Based on Intel® Arria 10 GX/GT FPGA

Silicom’s Cardiff/8 Intel/PSG FPGA Accelerator server adapter is based on a high performance Arria10 GT/GX, FPGAs.

1c1xlg@a10x0900 fpga card

FB1C1XLG@A10X0900 FPGA Server Adapter

Programmable PCI Express Server Adapter Based on Intel® Arria 10 GX/GT FPGA

Host Interface:
• Physical bus connector: x16 mechianincal, x8 lane PCIe

Configuration:
• Upload of FPGA configuration to flash via PCIe
• USB Blaster II on Board
• Serial Configuration EPCQ-L device memory size of 1Gb , using Active
Serial x4 configuration mode

On Board Memory: ( optional)
• DDR4 – 9 x devices on board of 8Gbx16 each DDR4 device, running up to 2400MT/s
• QDRIV- 1x device 144Mb density 18 bit data channels, running up to 1066 MHz

Board Management:
• Voltage level monitoring
• Thermal shut-down protection
• Over current protection on 12V input

FB1C1XLG@A10X0900 FPGA Server Adapter

Programmable PCI Express Server Adapter Based on Intel® Arria 10 GX/GT FPGA

General Technical Specifications:

Interface Standard: PCI-Express Base Specification Revision 3.0 (8 GTs)
Board Size: Standard height short add-in card 167.65mm X 111.15mm (6.6”X 4.376”)
PCI Express Card Type:

8-Lanes to Arria 10 GT/GX

Note: Can be plug only in 16xPCIe slot, future re-spin will change to x8

PCI Express Voltage: +12V ± 8%
On Board Connector Voltage +12V ± 8%
On board auxiliary power connector to support power over 75W
PCIe Connector: x16 Lanes
FPGA: Intel® FPGA Arria 10 900/1150 GT or GX
• See ordering information about types Arria 10 GX/GT
Memory: Optional Onboard DDR4, 2400MT, total memory 8GB
Onboard QDR-IV, 2132MT, 144Mb (4Mx36)
Holder: Metal Bracket
Weight: 350g (12.34oz) With Passive Heat-Sink and without optical modules
Cooling: – Passive heat sink or active heat sink solution
– Built-in thermal protection
Sensors/Monitors: – Thermal protection
– Voltage monitors
– Current protection
Operating Temperature: 0°C – 45°C (32°F – 113°F)
Storage: -40°C–65°C (-40°F–149°F)
Regulation: CE, FCC Class B, ROHS requirements.

Leds:

Connectors: (1) Auxiliary 12V power supply connector on board
(1) Mini-USB Type B connector, located on front of panel for on board USB Blaster II interface
(1) On board right angle JTAG connector 8 pins (custom) for FPGA

 

 

FB1C1XLG@A10X0900 FPGA Server Adapter

Programmable PCI Express Server Adapter Based on Intel® Arria 10 GX/GT FPGA

P/N

Description

Notes

FB1C1XLG@A10T1150-1PU Programmable PCI Express Server Adapter Based on Intel® FPGA Arria 10 1150GT

x8 Gen 3, mechanincal x8, Arria 10 GT 1150, QSFP28
Support for 4x25G
DDR, QDRII,
U = Fortville XL710 NOT
Installed,
Passive heat sink
With IO (one) QSFP28

FPGA PN:
10AT115S1F45E1SG
-1AU
Passive Heat-Sink,

FB1C1XLG@A10X0900-1PL Programmable PCI Express Server Adapter Based on Intel® FPGA Arria 10 900GX,

x8 Gen 3, mechanincal x16, Arria10 GX900,
L = Not installed:
Xl710,
Nemory and RAM, No IO
Passive Heat-Sink,

FPGA: PN 10AX090S1F45E1SG

-1AL, with Active heat sink

FB1C1XLG@A10T1150-1AU Programmable PCI Express Server Adapter Based on Intel® FPGA Arria 10 1150GT

x8 Gen 3, mechanincal x8, Arria 10 GT 1150, QSFP28
Support for 4x25G
DDR, QDRII,
U = Fortville XL710 NOT
Installed,
Active heat sink
With IO QSFP28

FPGA PN:
10AT115S1F45E1SG

 

1V7