PXG4I

Quad Port Copper Gigabit Ethernet PCI-X Server Adapter Intel® Based

This product has been discontinued – EOL Notification

The Silicom Gigabit Ethernet Servers adapters are 64-bit/133Mhz PCI-X network interface cards that contain six/ four/ two independent Gigabit ports on one PCI-X adapter.

Silicom Gigabit Ethernet Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

Silicom Gigabit Ethernet Server adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

Advanced Network Software Features

Silicom Gigabit Ethernet Server adapters supports advanced Networks software suite. The software suite includes increased fault tolerance, bidirectional load balancing, port aggregation, Jumbo Frame support, VLAN and server management Software for increased bandwidth, scalability, reliability and network availability.

PXG4I

Quad Port Copper Gigabit Ethernet PCI-X Server Adapter Intel® Based

Copper Gigabit Ethernet (1000Base-T) Adapters :

Independently copper Gigabit Ethernet channels support six, four, two and one Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex
RJ-45 female connectors

Common Key features:

Host Interface standard support:
PCI v2.2 32/64 bit, 33/66Mhz
PCI-X v1.0 32/64-bit, 66/100/133MHz
High performance, reliability, and low power use in Intel 82546 dual integrated MAC + PHY / SERDES chip controller
Ultra deep, 64 KB packet buffer per channel lowers CPU utilization, avoids PCI-X congestion
Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
Server class reliability, availability and performance features:
Link Aggregation and Load Balancing:
- Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
- Switch and NIC Independent
- Failover
Priority queuing – 802.1p layer 2 priority encoding
Virtual LANs –802.1q VLAN tagging
Jumbo Frame (16KB)
802.x flow control
Boot ROM embedded or optional can be used for Boot ROM applications
PCI Power Management Interface. (v1.1)
PCI Hot Plug. (IBM, Compaq, Dell, and Microsoft)
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
LEDs indicators for link/Activity/Speed status

PXG4I

Quad Port Copper Gigabit Ethernet PCI-X Server Adapter Intel® Based

Copper Gigabit Ethernet Technical Specifications - (1000Baes-T) Adapters:
IEEE Standard / Network topology:	Gigabit Ethernet, 1000Base-T Fast Ethernet, 100Base-TX Ethernet, 10Base-T
Full duplex / Simplex:	Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation:	Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s
Data Transfer Rate:	1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port 2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port
Cables and Operating distance:	10Base-T Category 3, 4, or 5 maximum 100m * 100Base-Tx Category 5 maximum 100m * 1000Base-T Category 5E maximum 100m *
Operating Systems Support
Operating system support:	Windows Netware Linux FreeBSD Unix Solaris VMware
General Technical Specifications
Interface Standard:	PCI v2.2 32/64 bit, 33/66Mhz PCI-X v1.0 32/64-bit, 66/100/133MHz
Board Size:	PCI Short add in card 168mm x 107mm (6.6”x4.2”) detailed information: Appendix A
PCI Card Type:	+3.3V 64 bit Card
PCI Voltage:	+3.3V (Min 3.0, Max, 3.6V)
PCI Connector:	+3.3V 64 bit
Controller:	Intel: 82546GB
Holder:	Metal Bracket
Weight:	130 gram (4.60 oz)
Power Consumption:	3.7A at 3.3V: Typical all ports operate at 1000Mbit/s. 1.7A at 3.3V: Typical all ports operate at 100Mbit/s. 1.5A at 3.3V: Typical all ports operate at 10Mbit/s. 1.4A at 3.3V: Typical No link at all ports
Operating Humidity:	0%–90%, non-condensing
Operating Temperature:	0°C – 50°C (32°F - 122°F)
PXI-Series:	-20°C–65°C (-4°F–149°F)
EMC Certifications:	FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Conducted Emissions Radiated Emissions CE EN 55024: 1998 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000 Harmonic Current Emissions CE EN 61000 3-3 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
*MTBF:**	146 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 10°C above the system ambient temperature was assumed for the cards components
LEDs
LEDs:	(3) LEDs per port Link Activity: Turns on any link speed, blinks on activity (green) 100Mbits/s: Turns on 100 Mbit/s link (green) 1000Mbit/s: Turns on 1000 Mbit/s link (green)
LEDs location:	LEDs are located on the PCB, visible via holes in the metal bracket holder
Connectors:	(4) Shielded RJ-45

PXG4I

Quad Port Copper Gigabit Ethernet PCI-X Server Adapter Intel® Based

P/N	Description	Notes
PXG4I-RoHS	Quad Port Copper Gigabit Ethernet PCI-X Server Adapter	RoHS compliant, 82546GB controller
PXG4IG	Quad Port Copper Gigabit Ethernet PCI-X Server Adapter	82546GB controller

5V1