EOL Products
PXG1FI
Single Port Fiber Gigabit Ethernet PCI-X Server Adapter Intel® 82545GM Based
This product has been discontinued – EOL Notification
The Silicom Gigabit Ethernet Servers adapters are 64-bit/133Mhz PCI-X network interface cards that contain six/ four/ two/ Single independent Gigabit ports on one PCI-X adapter.
Silicom Gigabit Ethernet Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.
Silicom Gigabit Ethernet Server adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.
Advanced Network Software Features
Silicom Gigabit Ethernet Server adapters supports advanced Networks software suite. The software suite includes increased fault tolerance, bidirectional load balancing, port aggregation, Jumbo Frame support, VLAN and server management Software for increased bandwidth, scalability, reliability and network availability.
PXG1FI
Single Port Fiber Gigabit Ethernet PCI-X Server Adapter Intel® 82545GM Based
Fiber Gigabit Ethernet 1000Baes-SX:
- Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-SX
- Small Form Factor (SFF) LC Connectors
Common Key Features:
- Host Interface standard support:
- PCI v2.2 32/64 bit, 33/66Mhz
- PCI-X v1.0 32/64-bit, 66/100/133MHz
- High performance, reliability, and low power use in Intel 82546 dual integrated MAC + PHY / SERDES chip controller
- Ultra deep, 64 KB packet buffer per channel lowers CPU utilization, avoids PCI-X congestion
- Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
- Server class reliability, availability and performance features:
- Link Aggregation and Load Balancing:
- Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
- Switch and NIC Independent
- Failover
- Priority queuing – 802.1p layer 2 priority encoding
- Virtual LANs –802.1q VLAN tagging
- Jumbo Frame (16KB)
- 802.x flow control
- Boot ROM embedded or optional can be used for Boot ROM applications
- PCI Power Management Interface. (v1.1)
- PCI Hot Plug. (IBM, Compaq, Dell, and Microsoft)
- Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
- LEDs indicators for link/Activity/Speed status
PXG1FI
Single Port Fiber Gigabit Ethernet PCI-X Server Adapter Intel® 82545GM Based
Fiber Gigabit Ethernet Technical Specifications - (1000Base-SX) Adapters: | |
| IEEE Standard / Network topology: | Fiber Gigabit Ethernet, 1000Base-SX (850nM) |
| Data Transfer Rate: | 2000Mbit/s in full duplex mode per port |
| Cables and Operating distance: | Multimode fiber: 220m at 62.5 um 550m at 50 um |
| Optical Output Power: | Typical: -6 dBm Minimum: -9.5 dBm |
| Optical Receive Sensitivity: | Typical: -21 dBm Maximum: -17 dBm |
Operating Systems Support | |
| Operating system support: | Windows Netware Linux FreeBSD Unix Solaris VMware |
General Technical Specifications | |
| Interface Standard: | PCI v2.2 32/64 bit, 33/66Mhz PCI-X v1.0 32/64-bit, 66/100/133MHz |
| Board Size: | PCI Short add in Card 168mm x 64mm (6.6”x2.5”) detailed information: Appendix A |
| PCI Card Type: | Universal 64 bit Card |
| PCI Voltage: | +5V (Min 4.75V, Max, 5.25V) |
| PCI Connector: | Universal 64 bit |
| Controller: | Intel: 82545 GM |
| Holder: | Metal Bracket |
| Weight: | 80 gram (2.82 oz) |
| Operating Humidity: | 0%–90%, non-condensing |
| Operating Temperature: | 0°C – 50°C (32°F - 122°F) |
| Storage: | -20°C–65°C (-4°F–149°F) |
| EMC Certifications: | FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class A Conducted Emissions Radiated Emissions CE EN 55024: 1998 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000 Harmonic Current Emissions CE EN 61000 3-3 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per |
LEDs | |
| LEDs: | (2) LEDs per port Link: Turns on link (green) ACT: Blinks on activity (green) |
| LEDs location: | LEDs are located on the PCB, visible via holes in the metal bracket holder |
| Connectors: | (2) LC connectors |
PXG1FI
Single Port Fiber Gigabit Ethernet PCI-X Server Adapter Intel® 82545GM Based
P/N | Description | Notes |
| PXG1FI-RoHS | Fiber (SX) Gigabit Ethernet PCI-X Server Adapter | RoHS Compliant, 82545GM controller |
| PXG1FI-LX-RoHS | Fiber (LX) Gigabit Ethernet PCI-X Server Adapter | RoHS Compliant, 82545GM controller |
Note: Note: Model P/N -LP
-LP: Assemble Low Profile Metal Bracket:
5V2
