PEXG6SFPI

Six Port SFP Gigabit Ethernet PCI Express Server Adapter Intel® Based

This product has been discontinued – EOL Notification

Silicom’s Gigabit Ethernet PCI Express Server adapters are PCI-Express Server Adapters cards that contain Multiple / Single Gigabit ports/ on a PCI-Express adapter.

Silicom’s Gigabit Ethernet PCI Express Server adapters are designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications. Silicom’s Gigabit Ethernet PCI Express Server adapters enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team.

Silicom’s Gigabit Ethernet PCI-Express Server adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

Silicom’s Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

PEXG6SFPI

Six Port SFP Gigabit Ethernet PCI Express Server Adapter Intel® Based

SFP Gigabit Ethernet:
Gigabit Ethernet Adapters with SFP cage support:

1000Base-LX Fiber Gigabit Ethernet with 1000Base-LX SFP transceiver
1000Base-SX Fiber Gigabit Ethernet with 1000Base-SX SFP transceiver
1000Base-T (1000Mbit/s) Copper Gigabit Ethernet with 1000Base-T SFP transceiver
Small Form Factor Pluggable (SFP) Cage for SFP LC connectors
2PortLink synchronization

Common Key Features:
Host Interface standard support:

PCI-Express Base Specification Revision 1.0a
High performance, reliability, and low power use in advanced Intel integrated MAC + PHY / SERDES chip Controllers
Ultra deep, packet buffer per channel lowers CPU utilization, avoids PCI-Express congestion
Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
Server class reliability, availability and performance features:
Link Aggregation and Load Balancing:
- Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
- Switch and NIC Independent
- Failover
Priority queuing – 802.1p layer 2 priority encoding
Virtual LANs –802.1q VLAN tagging
Jumbo Frame (16KB)
802.x flow control
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
LEDs indicators for link/Activity/Speed status

PEXG6SFPI

Six Port SFP Gigabit Ethernet PCI Express Server Adapter Intel® Based

SFP Gigabit Ethernet Technical Specifications (SFP) Adapters:
SFP (Small Form Factor Pluggable) supports:	1 Gbit SERDES interfaces supports 1000Base-X in order to connect with SFP to 1000Base-SX / 1000Base-LX / 1000Base-T SFP transceivers
IEEE Standard / Network topology: with 1000Base-T SFP	Gigabit Ethernet (1000Mbit/s only), 1000Base-T
IEEE Standard / Network topology: with 1000Base-SX SFP:	Fiber Gigabit Ethernet, 1000Base-SX (850nM)
Operating Systems Support
Operating system support:	Windows Netware Linux FreeBSD Unix Solaris X86 VMware
General Technical Specifications
Interface Standard:	PCI Express Base Specification Revision 1.0a
Board Size:	Standard height short add-in card 167.64mm X 111.18mm (6.60”X 4.377”)
PCI Express Card Type:	X4 Lane
PCI Express Voltage:	+3.3V +-9%, +12V +- 8%
PCI Connector:	X4 Lane
Controller:	Intel 82546GB
Holder:	Metal Bracket
Weight:	140 gram (4.94 oz)
Power Consumption:	17W: 0.370Aat 3.3Vand 1.300 A at 12V, Typical all ports operate at1000Mbit/s 12W, 0.370 A at 3.3Vand 0.870 at 12V: Typical No link at all ports 10W, 0.370 A at 3.3V and 0.740 at 12V: Typical without SFP at all ports
Operating Humidity:	0%–90%, non-condensing
Operating Temperature:	0°C – 50°C (32°F - 122°F)
Storage:	-20°C–65°C (-4°F–149°F)
EMC Certifications:	FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
*MTBF:**	52 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 15°C above the system ambient temperature was assumed for the cards components
LEDs
LEDs:	(2) LED per port Link: Turns on link (yellow) Act : blinks on activity (green)
LEDs location:	LEDs are located on the PCB, visible via holes in the metal bracket holder
Connectors:	Small Form Factor (SFF) Cage