EOL - PE210G2RS

Dual Port 10 Gigabit PCI Express Packet Processor Server Adapter

This product has been discontinued

Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor Server Adapter is designed for servers and high-end appliances.

The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter is targeted for network applications, such as multiservice VPN/ Firewall/IDS systems, that needs to process and monitor packets. The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter offloads host system possessor from various tasks related to packet processing. In high networks rates such as 10 Gigabit this is essential.

The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter is a complete PCI Express server adapter solution incorporates security acceleration engine with up to 4 Gbps of DES/3DES, AES, SHA-1, MD5 and RSA to support in-line IPSec, SSL, and other secure protocol processing. The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter can be programmable using SuperSOC™ solution built for a C/C++ environment; it eliminates the need for microcoding or proprietary scripting to enable rapid application development and leverages widely available, well understood development tools.

The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter is based on RMI XLS416 Multi-Core Superscalar Communication Processor and Netlogic L7 Payload inspection processor.

The Silicom’s 10 Gigabit Ethernet PCI Express RMI Packet Processor server adapter offers simple integration into any PCI Express X8 to 10 Gigabit Network.

EOL - PE210G2RS

Dual Port 10 Gigabit PCI Express Packet Processor Server Adapter

Adapter Features:

Programmable Intelligent 10 Gigabit PCI Express NIC
Front End Packet Processing offload
C-programmable, flexible
Cost and power efficient
Potential Capabilities:
Offloading from L1 to L7
Deep packet Inspection
RegEx Acceleration
Unified threat management, Firewall, Anti-Virus, VPN
Content Aware Packet forwarding
TCP/IP Offloading
Security Acceleration (IPSec, SSL)
Compression Acceleration
Storage Acceleration (RDMA, ISCSI, and FCoE)

Programmable Adapter:

A true programmable solution built for a C/C++ environment
The RMI processor eliminates the need for micro coding or proprietary scripting, enabling rapid application development and leveraging widely-available well-understood development tools
Software investment protection due to compatibility among RMI processors
The combination of multi-issue, multi-threaded architecture with security accelerators and NetLogic’s regular expression matching with zero memory footprint, offers the best of both worlds – in terms of price, power, and performance

Chips-set:

Based on RMI XLS416
NetLogic NLS 205/405 for Deep Packet Inspection at wire speed
NetLogic software (up to NLS1005) included
XLS Software will be forward compatible with RMI XLP series: Customer can start with XLS and port to XLP

XLS416 Processor Features:

CPU @ 1.2 GHz
Up to four processor cores each 4-way multithreaded
MIPS64®-compatible architecture with enhanced instructions
Security: DES/3DES, AES, ARC4, Kasumi, SHA, MD5, RSA, ECC
Compression: GZIP, DEFLATE, ZLIB

NLS405 Features:

Gbps (NLS405) throughput
String and Perl-Compatible Regular Expression (PCRE) signature recognition
Rule database stored on-chip – no external memory required for most databases
Database capacity expandable using host memory
Prevention against DoS
Support for over 100,000 simultaneous sessions or flows
Full content inspection across packet boundaries
Anchored and unanchored recognition with arbitrary length signatures

SFP+ 10 Gigabit Ethernet:

10 Gigabit Ethernet Adapter with SFP cage support:
Compliant with the SFP+ MSA SFF-8431 specification
Fiber 10 Gigabit Ethernet 10GBASE-SR:
10BASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-LR:
10BASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+)

Host Interface:

PCI Express X8 lane
Support PCI Express Base Specification Revision 2.0
LEDs indicator for link/Activity

Software:

A BSP will be provided which includes bootloader, Linux kernel and drivers for the XLS and NLS device. This will allow user to develop application on top of Linux. RMI also provides an RMIOS environment, which allows C program to run directly on the processor without a full-fledge OS. RMIOS provides optimized driver for the networking controller in XLS that is optimized for high performance packet processing applications.

EOL - PE210G2RS

Dual Port 10 Gigabit PCI Express Packet Processor Server Adapter

SFP+ 10 Gigabit Ethernet Technical Specifications (10GBase-SR/10GBase-LR):
SFP+ (Small Form Factor Pluggable) supports:	SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to connect with SFP+ to 10GBase-SR / 10GBase-LR
IEEE Standard / Network topology: with 10GBase-SR SFP+	Fiber 10 Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
IEEE Standard / Network topology: with 10GBase-LR SFP+	Fiber 10 Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
Operating Systems Support
Operating system support:	Linux
General Technical Specifications
Interface Standard:	PCI-Express Base Specification Revision 2.0
Board Size:	214.63mm X 106.68mm / (8.45” X 4.2”)
PCI Express Card Type:	X8 Lane
PCI Express Voltage:	+3.3V +-9%, +12V +- 8%
PCI Connector:	Gold Finger: X8
Controller:	Broadcom BCM5708C
Processor:	XLS416
Payload inspection processor:	NLS405
Holder:	Metal Bracket
Weight:	360gr (12.7oz)
Power Consumption:	Typical (maximum measured) 36W (12V @ 2.82A; 3.3V @ 0.66A) * requires power cable
Operating Humidity:	0% – 90%, non-condensing
Operating Temperature:	0°C – 50°C (32°F – 122°F)
Storage:	-20°C – 65°C (-4°F – 149°F)
EMC Certifications:	FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
LEDs
LEDs:	LED per port Link /ACT : Turns on link , blinks on activity (green)
LEDs location:	LED is located on the PCB, visible via holes in the metal bracket holder
Connectors:	(2) SFP+ cage

EOL - PE210G2RS

Dual Port 10 Gigabit PCI Express Packet Processor Server Adapter

P/N	Description	Notes
PE210G2RS416N4	Dual port 10GBE PCI Express Packet Processor Server Adapter	X8, Gen 2, based on RMI XLS416 Freq 1.2Ghz, NLS405, Up to 4Gbps throughout, 1Giga Byte DDR2 Freq. 667Mhz
PE210G2RS416N2	Dual port 10GBE PCI Express Packet Processor Server Adapter	X8, Gen 2, based on RMI XLS416 Freq 1.2Ghz, NLS205, Up to 2Gbps throughout, 1 Giga Byte DDR2 Freq. 667Mhz
PE210G2RS416N0	Dual port 10GBE PCI Express Packet Processor Server Adapter	X8, Gen 2, based on RMI XLS416 Freq 1.2Ghz, NLS chip de- populated, 1 Giga Byte DDR2 Freq. 667Mhz

Legend:
PE2: PCI Express Gen2
10G: 10 Gigabit Ethernet
2: Number of ports
R: RMI
S: XLS
408 / 416: XLS408 / XLS416
N4 / N2 / N0 N4: LS405 / N2: NLS205 / N0: NLS de-populated
-SR –LR -XR: -SR: Short reach : with –10GBase-SR 850nM optical T/R
-LR: Long reach : with –10GBase-LR 13100nM optical T/R
-XR: Without T/R

1V3