Products

SETAC VarioFlex Pyramid

M1E2SSD

SETAC PCI Express SSD Module

Silicom Solid State Drive SETAC ExpressModule Server card is PCI-Express X8 Solid State Drive card that can fit into a 3.5” HD form factor. The Silicom Solid State Drive SETAC ExpressModule adapter is the front I/O module in Silicom Server to Appliance Converter (SETAC) architecture.

The Silicom Solid State Drive SETAC ExpressModule Server cards are based on LSI SAS2008 SAS/SATA I/O controller with eight 6GBPs SAS/SATA ports. The advanced Integrated RAID options include support for the Integrated Mirroring (RAID 1), Integrated Mirroring Enhanced (RAID 1E), Integrated Striping (RAID 0), and Integrated Striping/Integrated Mirroring (RAID 10) solutions.

Silicom’s Solid State Drive SETAC ExpressModule Server cards are the ideal solution for implementing storage with RAID0/1/1E/10 capabilities and high speed read/write within high performance servers.

M1E2SSD

SETAC PCI Express SSD Module

RAID Features The LSISAS2008 controller offers the following Integrated RAID features:

  • Integrated Mirroring (RAID 1)
  • Integrated Mirroring Enhanced (RAID 1E)
  • Integrated Striping (RAID 0)
  • Integrated Striping/Integrated Mirroring (RAID 10)

PCI Express Features The LSISAS2008 controller supports the following PCI Express 2.0 features:

  • PCI Power Management 1.2
  • Active State Power Management, including the L1 and L0s states, is supported by placing links in a power-saving mode when there is no link activity
  • 32-deep command queue
  • Software compatibility with PCI and PCI-X software, which leverages existing PCI
  • PCI Express Traffic Class 0 and one virtual channel, with native support for 16 virtual functions (single-root)
  • Message Signaled Interrupts (both MSI and MSI-X), as well as INTx interrupt signaling for legacy PCI support

SAS Features: The LSISAS2008 controller supports the following SAS 2.0 features:

  • 6Gb/s, 3Gb/s, and 1.5Gb/s SAS data transfers
  • Serial, point-to-point, enterprise-level storage interface
  • Wide data transfers using from two to eight phys
  • Narrow ports consisting of a single phy
  • Data transfers using SCSI information units
  • Compatibility with SATA target devices
  • T10 Data Protection information model
  • 2 MB of on-chip EDRAM for context RAM
  • Greater than 2-TB addressing by means of 16-byte SCSI Read/Write/Verify CDB for SAS and SATA

SATA/STP: Features The LSISAS2008 controller supports the following SATA/STP features:

  • 6Gb/s, 3Gb/s, and 1.5Gb/s SATA data transfers
  • 6Gb/s, 3Gb/s, and 1.5Gb/s STP data transfers
  • Addressing of multiple SATA targets through an expander
  • Ability for multiple initiators to address a single target (in a failover configuration) through an expander

Common Key features:

  • PCI Express ExpressModule Electromechanical Specification Revision 1.0
  • Support PCI Express Base Specification 2.0 (2.5 GHz)

M1E2SSD

SETAC PCI Express SSD Module

Solid State Drive SETAC ExpressModule Server card Technical Specifications:

Solid State Drive SETAC ExpressModule Server card supports: Eight PCI Express phys, with support for x8, x4, x2, and x1 link widths

Operating Systems Support

Operating system support: Windows
Linux
VMware

General Technical Specifications

Interface Standard: PCI Express ExpressModule Electromechanical Spec. Revision 1.0
Silicom SETAC
PCI-Express Base Specification Revision 2.0 ( 5 GT/s)
Board Size: 168.2mm x 98mm (6.62”X3.858”)
PCI Express Card Type: X8 Lane
PCI Express Voltage: +12V +- 8%
PCI Connector: Gold Finger: X8
Controller:  LSI LSISAS2008
Holder: Not included
Weight: 0.190Kg (With 8 modules)
Power Consumption (with data): 19.8W
Power Consumption: 12.2W
Operating Temperature: -5°C – 40°C (23°F – 105°F)
Storage: -40°C–65°C (-40°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendements A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Curent Emissions
CE EN 61000 3-3 1995, Amendement A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduce >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF(Without mSATA Modules): 186 Years
MTBF(With mSATA Modules): 24 Years

LEDs

LEDs location: Active Led(Green), Error Led(Yellow)
Connectors: LED is located on the PCB, visible via holes in the metal bracket holder on the right side

M1E2SSD

SETAC PCI Express SSD Module

P/N

Description

Notes

M1E2SSD-R Solid State Drive SETAC ExpressModule Server card x8 Gen2, ExpressModule,
Based on LSI LSISAS2008
M1E2SSD-1T-C-R Solid State Drive SETAC ExpressModule Server card with 1 TB Flash Storage x8 Gen2, ExpressModule,
Based on LSI LSISAS2008

 

-C: with canister

Advanced features may require driver software support

1V4