Products

SETAC VarioFlex Pyramid

M1E210G2i40-T

Dual port Copper 10 Gigabit Ethernet Express Module Server Adapter

Silicom’s 10 Gigabit Ethernet Express Module server adapters are designed for Servers and high-end network appliances. The Silicom 10 Gigabit Ethernet Express Module Server adapter offers simple integration into any PCI Express X8 to UTP 10GBase-T Gigabit Networks.

The Silicom’s 10 Gigabit Ethernet Express Module server adapters are based on Intel X540. The Intel X540 10 Gigabit Ethernet controller includes two fully integrated Ethernet Media Access Control (MAC) and two fully integrated 10GBASE-T copper PHYs.

The Intel X540 10 Gigabit Ethernet controllers includes hardware acceleration that can offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.

Silicom’s 10 Gigabit Ethernet Express Module Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

M1E210G2i40-T

Dual port Copper 10 Gigabit Ethernet Express Module Server Adapter

Copper 10 Gigabit Ethernet 10GBASE-T :

  • Integrated 10 Gigabit Copper PHY supports 10GBASE-T, 1000 BASE- T and 100BASE- TX
  • Triple speed 10Gbps (10GBase-T), 1000Mbps (1000Base-T) and 100 Mbps (100Base-Tx)
  • RJ-45 connector supports CAT 6A cable

Performance Features:

  • Support for jumbo frame up to 15.5KB
  • Flow control support
  • Statistics management and RMON
  • 802.1q VLAN support
  • TCP segmentation offload: up to 256KB
  • IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
  • Fragmented UDP checksum offload for Packet Reassembly
  • Message Signal interrupts ( MSI)
  • Message Signal interrupts ( MSI-X)
  • Interrupt throttling control to limit maximum interrupt rate and improve CPU usage •
  • Multiple Receive Queues ( RSS) 8×8 & 16×4 •
  • 128 Transmit queues per port
  • Support for 64 Virtual Device Queues (VMDq) per port
  • Support Direct Cache Access ( DCA)
  • Large on chip receive packet buffer (384 KB)
  • Large on chip transmit packet buffer ( 160KB)
  • Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other packets going to the wire
  • Time sync- IEEE1588- Precision Time Protocol (PTP)
  • Supports the BCN (Backward Congestion Notification) protocol in addition to the EEDC functionality
  • DDP Offload
  • IEEE 802.1p layer 2 priority encoding
  • LEDs indicators for link/Activity and speed

Host Interface:

  • PCI Express X8 lanes
  • Support PCI Express Base Specification 2.1 (5GT/s)
  • PCI Express Module Specification revision 1.0

M1E210G2i40-T

Dual port Copper 10 Gigabit Ethernet Express Module Server Adapter

Copper 10GbASE-T Ethernet Adapters Technical Specification:

IEEE Standard / Network topology: Copper 10Gigabit Ethernet, 10GBASE-T, IEEE 802.3an
Gigabit Ethernet, 1000Base-T
100 Mb Ethernet: 100BASE- TX
Data Transfer Rate: 20 Gb/s, 2000Mb/s and 200 Mb/s in full duplex mode per port
Cables and Operating distance: 100Base-Tx Category 5 maximum 100m
1000Base-T Category 5E maximum 100m
10GBase-T Category 6A maximum 100m

Operating Systems Support

Operating system support: Windows
Linux

General Technical Specifications

Interface Standard: PCI Express Module Specification revision 1.0 Silicom SETAC
PCI-Express Base Specification Revision 2.1 (5GT/s)
Board Size: Low profile add-in card: 167.65mm X 68.91mm (6.60”X 2.713”)
PCI Express Card Type: X8 Lane
PCI Express Voltage: +12V +- 8%
PCI Connector: Gold Finger: X8 Lane
Controller:  Intel x540
Holder: Not included
I/O: RJ45
Weight: 190g
Power Consumption: 13.44 W, 1.12A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode).
7.8 W, 0.87 A at 12V: Typical all ports operate at 1Gb/s, (Normal Mode).
5.04 W, 0.42 A at 12V: Typical all ports operate at 100Mb/s, (Normal Mode).
5.64 W, 0.47 A at 12V: Typical No link at all ports
Operating Humidity: 0%–90%, non-condensing
Operating Temperature: -5°C – 40°C (23°F – 104°F)
Storage: -40°C–65°C (-40°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendements A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendement A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs

LEDs: (2) LED per port
Right LED: Speed:
Link of 1Gb/s: Turns on link (yellow)
Link of 10Gb/s: Turns on link (green)
Left LED: Link /ACT:
Turns on link , blinks on activity (green)
LEDs location: LEDs are located in the RJ45 connector port
Connectors: (2) Shielded RJ-45

M1E210G2i40-T

Dual port Copper 10 Gigabit Ethernet Express Module Server Adapter

P/N

Description

Notes

M1E210G2I40-T Dual Port Copper 10 Gigabit Ethernet Express Module Server Adapter X8 Gen 2.1, Based on Intel X540, RoHS compliant

 

1V2