Products

Programmable NPU Server Adapters

PE210G2P316

Dual Port 10 Gigabit Ethernet PCI Express Packet Processor Server Adapter

Silicom’s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor Server adaptor is targeted for network applications, such as multiservice Intrusion detection and prevention ( IDS / IPS), unified threat management ( UTM) , Deep packet inspection, VPN/Firewall/IDS systems, and any other offload packet processing PCI Express adapter.

Silicom’s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor server adapter is a complete PCI Express server adapter solution based on a high performance NetLogic XLP Multi-Core EC4400 cores.

The Silicom XLP300 series integrates up to 16 nxCPU ™ processing units , each up to 2.0 GHz, with quad –issue, multi-threaded instructions pipelines and superior memory subsystem architecture. Each of nxCPUs appears to the software as completely separate processing element.

The Silicom’s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor is based on EC4400 is core is MIPS64 release-II ISA-compliant and contains an IEEE754 and MIPS-compliant floating point unit per core. The NetLogioc XLP processor incorporates several networking acceleration engines that offload processing tasks from the EC4400: An REGEX engine , a robust Autonomous Network Acceleration Engine, Packet ordering engine Security acceleration engine, compression / decompression engine, DMA and storage acceleration engines.

Silicom’s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor server adapter is programmed using SuperSOC™ solution built for a C/C++ environment; it eliminates the need for microcoding or proprietary scripting to enable rapid application development and leverages widely available, well understood development tools. Silicom’s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor server adapter offers simple integration into any PCI Express X8 to Gigabit Network.

PE210G2P316

Dual Port 10 Gigabit Ethernet PCI Express Packet Processor Server Adapter

Adapter Features:

  • Programmable Intelligent Dual Port 10GBE PCI Express Gen2.0 NIC
  • Front End Packet Processing Offload
  • C-programmable, flexible
  • Cost and power efficient
  • Acceleration engines
  • 10 Gbps ( XLP 316) bandwidth Autonomous Layer 7 DPI ( RegEX) Engine module
  • Network Acceleration Engine
  • Packet Ordering Engine
  • Bandwidth Autonomous up to 10Gbps ( XLP 316) Security Acceleration Engine
  • Storage Acceleration
  • Load Balancing

Programmable Adapter:

  • A true programmable solution built for a C/C++ environment
  • The NetLogic processor eliminates the need for micro coding or proprietary scripting, enabling rapid application development and leveraging widely-available well-understood development tools
  • Software investment protection due to compatibility among NetLogic processors
  • The combination of multi-issue, multi-threaded architecture with security accelerators and NetLogic’s regular expression matching with zero memory footprint, offers the best of both worlds – in terms of price, power, and performance

Chips-set and Software:

  • Based on NetLogic XLP316
  • NetLogic software included
  • XLP Software will be forward compatible with NetLogic XLR /XLS series: Customers with XLR or XLS can port their application to the XLP

XLP316 Processor Features:

  • 16 NXCPUs @1.6 Ghz, 40nM
  • Four processor cores, each 4-way multithreaded
  • MIPS64 Release-II ISA-compliant and contains an IEEE754 and MIPS-compliant floating point unit per core
  • Layer – 7 DPI ( Regex) Enginer module
  • Security: DES/3DES, AES, ARC4, Kasumi, SHA, MD5, RSA, ECC
  • Compression: GZIP, DEFLATE, ZLIB
  • Acceleration Engines:
  • A Network Acceleration Engine®
  • A Packet Ordering Engine (POE) supports packet ordering for up to 64K flows
  • Security Acceleration Engine® module
  • Compression/decompression engine
  • DMA and Storage Acceleration

Dual SFP+ 10 Gigabit Ethernet Port:

  • 10 Gigabit Ethernet Adapter with SFP cage support:
  • Compliant with the SFP+ MSA SFF-8431 specification
  • Fiber 10 Gigabit Ethernet 10GBASE-SR:
  • 10BASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+)
  • Fiber 10 Gigabit Ethernet 10GBASE-LR:
  • 10BASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+)

Host Interface:

  • PCI Express x8 lane
  • Support PCI Express Base Specification Revision 2.0
  • LEDs indicator for link/Activity

Software:

This will allow users to develop application on top of Linux. NetLogic also provides an NETOS environment, which allows C program to run directly on the processor without a full-fledge OS. NETOS provides optimized driver for the networking controller in XLP that is optimized for high performance packet processing applications

PE210G2P316

Dual Port 10 Gigabit Ethernet PCI Express Packet Processor Server Adapter

SFP+ 10 Gigabit Ethernet Technical Specifications (10GBase-SR/10GBase-LR):

SFP+ (Small Form Factor
Pluggable) supports:
SFI interfaces supports 10GBase-R PCS and 10 Gigabit
PMA in order to connect with SFP+ to 10GBase-SR /
10GBase-LR
IEEE Standard / Network topology:
with 10GBase-SR SFP+
Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
IEEE Standard / Network topology:
with 10GBase-LR SFP+
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)

Operating Systems Support

Operating system support: Linux
NETOS

General Technical Specifications

Interface Standard: PCI-Express Base Specification Revision 2.0
Board Size: Standard height short add-in card 167.64mm X 106.68mm (6.60”X 4.2”)
PCI Express Card Type: X8 Lane
PCI Express Voltage: +3.3V +-9%,
+12V +- 8%
PCI Connector: Gold Finger: x8
Processor: XLP316 / 16 nxCPU 1.6GHz /, 40nM
Memory: Up to 8 Giga Byte, DDR3 1600MHz
Holder: Metal Bracket
Operating Humidity: 0%–90%, non-condensing
Operating Temperature: 0°C – 50°C (32°F – 122°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendements A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendement A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
Safety: UL

LEDs

PE210G2RP316: SFP+ LEDs/ Connectors Specifications:
SFP+ LEDs: LED per port
Link /ACT : Turns on link , blinks on activity (green)
SFP+ LEDs location: LED is located on the PCB, visible via holes in the metal
bracket holder
SFP+ Connector: (2) SFP+ cage
PE210G2RP316: RJ45+ Magnetics + LEDs/ Connectors Specifications:
LEDs location: LEDs are located in RJ45 connector
Connectors: Shielded RJ-45

PE210G2P316

Dual Port 10 Gigabit Ethernet PCI Express Packet Processor Server Adapter

P/N

Description

Notes

PE210G2RP31612-SR Dual Port (SR)10 Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@1.2Ghz, 2-8 Giga Byte DDR3,
on board support for Fiber SR, RoSH compliant, 10G DPI ReGEX engine
PE210G2RP31612-LR Dual Port (LR) 10Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@1.2Ghz, 2-8 Giga Byte DDR3,
on board support for Fiber LR, RoSH compliant, 10G DPI ReGEX
PE210G2RP31612-XR Dual Port SFP+ 10Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@1.2Ghz, 2-8 Giga Byte DDR3,
Support Silicom SFP+ approved transceiver. RoHS compliant, 10G DPI ReGEX
PE210G2RP316xx-SR Dual Port (SR)10 Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@xxGhz, 2-8 Giga Byte DDR3,
on board support for Fiber SR, RoSH compliant, 10G DPI ReGEX engine
PE210G2RP316xx-LR Dual Port (LR) 10Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@xxGhz, 2-8 Giga Byte DDR3,
on board support for Fiber LR, RoSH compliant, 10G DPI ReGEX
PE210G2RP316xx-XR Dual Port SFP+ 10Gigabit Ethernet PCI Express Packet Processor Server Adapter X8, Gen 2, based on NetLogic XLP316@xxGhz, 2-8 Giga Byte DDR3,
Support Silicom SFP+ approved transceiver. RoHS compliant, 10G DPI ReGEX

 

PE210G2RP316- Legend:

PE2: PCI Express Gen2
10G: 10 Gigabit Ethernet
2: Number of ports
R: RMI/NetLogic
P316: XLP316
Xx: Frequency operation. 16- 1.6Ghz, 14 – 1.4Ghz 12 -1.2Ghz

-SR –LR -XR:
-SR: 10GBase-SR 850nM optical T/R
-LR: 10GBase-LR 13100nM optical T/R
-XR: Without T/R

1V2