Products

Networking Adapters

PE2G2I80

Dual Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® 82580DB Based

Silicom’s Dual Port Copper Gigabit Ethernet PCI Express Server adapter is PCI-Express X4 Copper Gigabit Ethernet network interface card that contain Multiple Gigabit ports on a PCI-Express adapter.

Silicom’s Dual Port Copper Gigabit Ethernet PCI Express Server adapter is designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.

Silicom’s Dual Port Copper Gigabit Ethernet PCI Express Server adapter enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team.

Silicom’s Dual Port Copper Gigabit Ethernet PCI Express Server adapter has an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

 

PE2G2I80 gigabit card

Silicom’s Dual Port Copper Gigabit Ethernet PCI Express Server adapter is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

Silicom’s Dual Port Copper Gigabit Ethernet server adapter is based on Intel 82580 Dual port Gigabit Ethernet MAC+PHY of Intel Controller.

PE2G2I80

PE2G2I80

Dual Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® 82580DB Based

Performance Features:

  • 8 Transmit and Receive queues per port
  • Up to 8 queues of Receive Side Scaling (RSS) minimize CPU utilization across multiple processor systems
  • Support for 8 pools (single queue) of virtual machine Device Queues (VMDq) per port
  • Support Direct Cache Access (DCA)
  • Support Intel I/O Acceleration Technology v3.0
  • TSO interleaving for reduced latency
  • Minimized device I/O interrupts using MSI and MSI-X
  • UDP, TCP and IP checksum offload
  • UDP and TCP transmit segmentation offload (TSO)
  • SCTP receive and transmit checksum offload
  • Packet interrupt coalescing timers (packet timers) and absolute- delay interrupt timers for both transmit and receive operation

Copper Gigabit Ethernet 1000Base-T :

  • Support PCI Express Base Specification 2.0 (5 GTs)
  • High performance, reliability, and low power use in Intel 82580 Dual integrated MAC + PHY and SERDES chip Controllers
  • Ultra deep, packet buffer per channel lowers CPU utilization
  • Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
  • Server class reliability, availability and performance features:
  • Link Aggregation and Load Balancing:
    • Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
    • Switch and NIC Independent
    • Failover
  • Priority queuing – 802.1p layer 2 priority encoding
  • Virtual LANs –802.1q VLAN tagging
  • Jumbo Frame (9.5KB)
  • 802.x flow control
  • Multicast/ broadcast Packet replication
  • Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
  • Supports Vital Product Data (VPD)
  • LEDs indicators for link/Activity/Speed status

PE2G2I80

Dual Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® 82580DB Based

Copper Gigabit Ethernet Technical Specifications – (1000Base-T) Adapters:

IEEE Standard / Network topology: Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex: Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation: Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s
Data Transfer Rate: 1000 Mb/s, 100 Mb/s and 10 Mb/sec in simplex mode per port.
2000Mb/s 200Mb/s and 20Mb/s in full duplex mode per port
Cables and Operating distance: 10Base-T Category 3, 4, or 5 maximum 100m
100Base-Tx Category 5 maximum 100m
1000Base-T Category 5E maximum 100m

Operating Systems Support

Operating system support: Windows
Linux
FreeBSD
VMware

General Technical Specifications

Interface Standard: PCI-Express Base Specification Revision 2.0 ( 5 GTs)
Board Size: Low profile short add-in card: 127mm X 68.91mm (5.00”X 2.713”)
PCI Express Card Type: X4 Lane
PCI Express Voltage: +3.3V +-9%,
+12V +- 8%
PCI Connector: Gold Finger: X4
Controller:  Intel 82580DB
Holder: Metal Bracket
I/O: Dual RJ45 located on edge of the board
Weight: 110g (3.88 oz)
Power Consumption: 3.6W, 0.3A at 12V:
Typical all ports operate at 1000Mb/s.
2.88 W, 0.24A at 12V:
Typical all ports operate at 100Mb/s.
2.88 W, 0.24 at 12V:
Typical all ports operate at 10Mb/s.
2.4 W, 0.2A at 12V:
Typical No link at all ports
Holder: Metal Bracket: Full Height/Low profile Height
Operating Humidity: 0%–90%, non-condensing
Operating Temperature: 0°C – 50°C (32°F – 122°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF: 310 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature – 25°C. Temperature rise of 15°C above the system ambient temperature was assumed for the cards components

LEDs

LEDs: (3) Led’s per port
Link / Act: Turn on any Link (1000, 100 or 10), Blinks on Activity (green)
100: Turns on 100Mb/s Link (green)
1000: Turns on 1000 Mb/s Link (green)
LEDs location: Led’s are located on the PCB, visible via holes in the metal bracket holder
Connectors: (4) Shielded RJ-45

PE2G2I80

Dual Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® 82580DB Based

P/N

Description

Notes

PE2G2I80-R Dual Port Copper Gigabit Ethernet PCI Express Server Adapter X4, Based on Intel 82580DB, Low-Profile, RoHS compliant

 

Note: Model P/N -RoHS
-RoHS: RoHS Compliant / Lead free adapter.
-LP: Assemble Low Profile Metal Bracket, available in dual or single port only

1V3