Products

EOL Products

PEG6BPI5FC

Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel® Based

This product has been discontinuedEOL Notification

Silicom’s Six Port Copper Gigabit Ethernet front connector Bypass server adapter is a PCI-Express X8 network interface card that provides a front-panel connector, cables and LED assemblies to allow port access and LED displays in the front panel of the server.

The Silicom’s Six Port Copper Gigabit Ethernet Bypass front connector server adapter is targeted to inline network system that maintains network connectivity when system fails. The Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter is designed for servers that enable adding connectors on the host system front panel.

The Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter includes a closed metal bracket at the back of the server, cables and the front panel-connector installed in the front of the server.

Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter supports Normal, Bypass and Disconnect modes. In Normal mode, the ports are independent interfaces. In Bypass mode, all packets received from one port are transmitted to the adjacent port.

In Disconnect mode, the adapter simulates switch / rout cable disconnection. Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter can Bypass or disconnect its Ethernet ports on a host system failure, power off, or upon software request.

In Bypass mode, the connections of the Ethernet ports are disconnected from the system and switched over to the other port to create a crossed connection loop-back between the Ethernet ports. Hence, in bypass mode all packets received from one port are transmitted to the adjacent port and vice versa.

This feature enables to bypass a failed system and provides maximum up time for the network. In Disconnect mode, the adapter simulates switch / router cable disconnection. In Disconnect mode, the switch / router does not detect link partner of the adapter.

Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter includes an on board WDT (Watch Dog Timer) controller. The adapter’s software drivers or software application can write commands to the on board WDT controller. The adapter’s software drivers, WDT controller and the Bypass circuitry provide an interface that control and manage the mode of the adapter.

Silicom’s Six Port Gigabit Ethernet front connector Bypass server adapter is based on Intel 82575 Dual port Gigabit Ethernet MAC+PHY of Intel Controller.

PEG6BPI5FC

Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel® Based

Front Connector:

  • Front-panel connector, cables and LED assemblies to allow port access and LED displays at the front of the server

Bypass:

  • Bypass Ethernet ports on Power Fail, System Hangs or Software Application Hangs
  • Software programmable Bypass or Normal Mode
  • On Board Watch Dog Timer (WDT) Controller
  • Software programmable time out interval
  • Software Programmable WDT Enable / Disable counter
  • Software programmable Bypass Capability Enable / Disable
  • Software Programmable mode (Bypass or Normal mode) at Power up
  • Software Programmable mode (Bypass, Normal mode) at Power off
  • Independent Bypass operation in every two ports
  • Emulates standard NIC

Copper Gigabit Ethernet 1000Base-T :

  • Independently copper Gigabit Ethernet channels support six, four, two and one Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
  • Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
  • Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex
  • RJ-45 female connectors

Common Key features:

  • Host Interface standard support PCI Express 1.1
  • High performance, reliability, and low power use in Intel 82575 dual integrated MAC + PHY and SERDES chip controller
  • Ultra deep packet buffer per channel lowers CPU utilization
  • Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
  • Priority queuing – 802.1p layer 2 priority encoding
  • Virtual LANs –802.1q VLAN tagging
  • Jumbo Frame (9.5KB)
  • 802.x flow control
  • Statistics for SNMP
  • LEDs indicators for link/Activity/Bypass Mode status

PEG6BPI5FC

Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel® Based

Bypass Specification:

WDT Interval (Software Programmable): 3,276,800 mSec (3,276.8 Sec): Maximum
100 mSec ( 0.1 Sec) : Minimum
WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.
wdt_interval_parameter: {Valid Range: 0-15}

Copper Gigabit Ethernet Technical Specifications – (1000BASE-T) Adapters:

IEEE Standard / Network topology: Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex: Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation: Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s
Data Transfer Rate: 1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port.
2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port
Cables and Operating distance: 10Base-T Category 3, 4, or 5 maximum 50m *
100Base-Tx Category 5 maximum 50m *
1000Base-T Category 5E maximum 50m *
*Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard

Operating Systems Support

Operating system support: Windows
Linux
FreeBSD
VMware

General Technical Specifications

Interface Standard: PCI-Express Base Specification Revision 1.1
Board Size: PCI add in card: 218.44mm x 111.15mm (8.6”X 4.376”)
PCI Express Card Type: X8
PCI Express Voltage: +3.3 +- 9%,
+12V +- 8%
PCI Connector: Gold Finger: X8
Controller:  Intel 82575EB
Holder: Metal Bracket: Full Height
I/O: Located on the metal bracket
Weight: 260 gram (9.171 oz)
Power Consumption: Normal mode:
12.95 W, 2.18 A at 3.3V and 0.49 A at 12V :
Typical all ports operate at 1000Mbit/s.
8.00 W, 1.08 A at 3.3V and 0.37 A at 12V:
Typical all ports operate at 100Mbit/s.
6.91 W,0.82 A at 3.3V and 0.35 A at 12V:
Typical all ports operate at 10Mbit/s.
6.7 W, 0.72 A at 3.3V and 0.36 A at 12V:
Typical No link at all ports.
Bypass mode:
6.73 W, 0.73 A at 3.3V and 0.36 A at 12V
Operating Temperature: 0°C – 50°C (32°F – 122°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.By 1kHz CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF*: 64 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature – 25°C. Temperature rise of 15°C above the system ambient temperature was assumed for the cards components

LEDs

LEDs: (2) LEDs per port
Link/Activity: Turns on any link speed, blinks on activity (green).
100/1000/Bypass: Turns on green on 100 Mbit/s link.
Turns on orange on 1000 Mbit/slink
Bypass: Blink orange
LEDs location: LEDs are located in the RJ45
Connectors: (4+2) Shielded RJ-45 located on front panel connector

PEG6BPI5FC

Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel® Based

P/N

Description

Notes

PEG6BPI5-BL-SD-RoHS Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Front connector, Include assembly kit for Intel Ballenger:
Intel P/N: NSC2U
RoHS Compliant,
Based on 82575
PEG6BPI5FC-SD-RoHS Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter RoHS Compliant,
Based on 82575

 

Note: Model P/N -SD/RoHS
-SD: Side driver
-RoHS: RoHS Compliant / Lead free adapter

1V3