EN  |  DESP

Products

EOL Products

PEG4I

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® Based

This product has been discontinuedEOL Notification

Silicom’s Gigabit Ethernet PCI Express Server adapters are PCI-Express Server Adapters cards that contain Multiple / Single Gigabit ports/ on a PCI-Express adapter.

Silicom’s Gigabit Ethernet PCI Express Server adapters are designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.

Silicom’s Gigabit Ethernet PCI Express Server adapters enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team.

Silicom’s Gigabit Ethernet PCI-Express Server adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

Silicom’s Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

PEG4I

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® Based

Copper Gigabit Ethernet (1000Base-T) Adapters:

  • Independently copper Gigabit Ethernet channels support six, four, two and one Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
  • Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
  • Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex
  • RJ-45 female connectors

Performance Features:

  • Host Interface standard support:
  • PCI-Express Base Specification Revision 1.0a
  • High performance, reliability, and low power use in advanced Intel integrated MAC + PHY / SERDES chip Controllers
  • Ultra deep, packet buffer per channel lowers CPU utilization, avoids PCI-Express congestion
  • Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
  • Server class reliability, availability and performance features:
  • Link Aggregation and Load Balancing
    • Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
    • Switch and NIC Independent
    • Failover
  • Priority queuing – 802.1p layer 2 priority encoding
  • Virtual LANs –802.1q VLAN tagging
  • Jumbo Frame (16KB)
  • 802.x flow control.
  • Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
  • LEDs indicators for link/Activity status

PEG4I

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® Based

Copper Gigabit Ethernet Technical Specifications - (1000Base-T) Adapters:

IEEE Standard / Network topology: Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex:Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation:Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s
Data Transfer Rate:1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port.
2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port
Cables and Operating distance: 10Base-T Category 3, 4, or 5 maximum 100m
100Base-Tx Category 5 maximum 100m
1000Base-T Category 5E maximum 100m

Operating Systems Support

Operating system support: Windows
Netware
Linux
FreeBSD
Unix
Solaris X86
VMware

General Technical Specifications

Interface Standard:PCI-Express Base Specification Revision 1.0a
Board Size: Standard height short add-in card 167.64mm X 111.18mm (6.60”X 4.377”)
PCI Express Card Type:X4 Lane 
PCI Express Voltage:+3.3V +-9%,
+12V +- 8%
PCI Connector: X4 Lane
Controller: Intel 82571EB
Holder:Metal Bracket
Weight:130 gram (4.6 Oz)
Power Consumption:9.5W: 1.82 A at 3.3V and 0.29A at 12V, Typical all ports operate at 1000Mbit/s.
6.25W: 0.83 A at 3.3V and 0.29 at 12V, Typical all ports operate at 100Mbit/s.
5.4W: 0.58 A at 3.3V and 0.29 at 12V, Typical all ports operate at 10Mbit/s
5.6W: 0.62 A at 3.3V and 0.29 at 12V, Typical No link at all ports
Operating Humidity:0%–90%, non-condensing
Operating Temperature: 0°C – 50°C (32°F - 122°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs

LEDs:(3) LEDs per port
Link / Act: Turn ons any Link (1000, 100 or 10), Blinks on Activity (green)
100: Turns on 100Mb/s Link (green)
1000: Turns on 1000 Mb/s Link (green)
LEDs location:LEDs are located on the PCB, visible via holes in the metal bracket holder
Connectors:Shielded RJ-45

PEG4I

Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® Based

P/N

Description

Notes

PEG4i-RoHSQuad Port Copper Gigabit Ethernet
PCI Express Server Adapter
X4, Based on 82571

 

Note: Model P/N -RoHS
-RoHS: RoHS Compliant / Lead free adapter.

1V9

FacebookTwitterLinkedIn
YouTube Channel