PE210G2i9-T - Dual Port Copper (T) 10 Gigabit Ethernet PCI Express Server Adapter Intel® based
Introduction Key features Technical Specifications
PE210G2i9-T PE210G2i9-T: LED / Connector Specifications
Order Information
 Download PDF
Introduction (Back to top)
Silicom’s 10 Gigabit Ethernet PCI Express server adapters are designed for Servers and high-end appliances. The Silicom 10 Gigabit Ethernet PCI Express Server adapter offers simple integration into any PCI Express X8 to UTP 10GBase-T Gigabit Networks. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.
The Silicom’s 10 Gigabit Ethernet PCI Express server adapters are based on Intel 82599EB. The Intel 82599EB 10 Gigabit Ethernet controller includes two fully integrated Gigabit Ethernet Media Access Control (MAC) and XAUI ports. In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. The Intel 82599EB 10 Gigabit Ethernet controller includes hardware acceleration that can offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.
Silicom’s 10 Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.
Key features (Back to top)
Copper 10Gigabit Ethernet 10GBASE-T:
•
10 Gigabit Copper Ethernet port supports 10GBASE-T, 1000 BASE- T and 100BASE- TX.
•
RJ-45 connector supports CAT 6A cable.
Host Interface:
•
PCI Express X8 lane
•
Support PCI Express Base Specification 2.0 (5GT/sec)
•
Low-Profile Adapter
•
Low power
Performance Features:
• IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
• Fragmented UDP checksum offload for Packet Reassembly
• CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC).
• Support for 16 virtual machine Device Queues ( VMDq) per port
• Support Direct Cache Access ( DCA)
• Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other packets going to the wire.
• Minimized device I/O intterupts using MSI and MSI-X
• Offload of TCP / IP / UDP checksum calculation and TCP segmentation
• Large on chip receive packet buffer (512 KB)
•
Large on chip transmit packet buffer (160KB)
•
Supports the VPD (Vital Product Data) capability defined in the PCI specification ver. 3.0.
•
Time sync- IEEE1588- Precision Time Protocol (PTP)
•
Supports the BCN (Backward Congestion Notification) protocol in addition to the EEDC functionality
LAN Features:
•
IEEE 802.x flow control support
• IEEE 802.q VLAN tagging support
• Supports a mode where all received and sent packets have at least one VLAN tag in addition to the regular tagging
•
IEEE 802.1p layer 2 priority encoding
•
Jumbo Frame (up to 16KB).
•
Link Aggregation and Load Balancing
•
RFC2819 RMON MIB statistics
•
TCP Segmentation Offload Up to 256KB
•
Ipv6 Support for IP/TCP Receive Checksum Offload
•
DDP Offload
•
LEDs indicator for link/Activity
Security Features:
•
IEEE P802.1AE LinkSec specification. It incorporates an inline packet crypto unit to support both privacy and integrity checks on a packet by packet basis. The transmit data path includes both encryption and signing engines. On the receive data path it includes both decryption and integrity checkers.
•
IPsec off load for a given number of flows.
•
Off-load IPsec for up to 1024 Security associations (SA) for each of TX and RX.
•
AH and ESP protocols for authentication and encryptio
•
AES-128-GMAC and AES-GCM crypto engines.
•
Transport mode encapsulation.
Technical Specifications: (Back to top)
Copper Ethernet Technical Specifications - (10GBASE-T) Adapters:
| IEEE Standard / Network topology: |
Copper 10Gigabit Ethernet, 10GBASE-T
Gigabit Ethernet, 1000Base-T and 100BASE- TX
| | Full duplex / Simplex: |
Support both Simplex & Full duplex operation in 1000Mbit/sec and 100Mb/s operating speeds, and only Full duplex in 10Gbit/s operating speed. | | Auto negotiation: | Auto-negotiation between Full duplex and simplex in 1Gbit/s operations, and between 10Gb/s, 100Mb/s and 100Mb/s. | |
Data Transfer Rate: |
1000 Mbit/s and 100Mb/s in simplex mode per port.
20Gbit/s and 2000 Mbit/s in full duplex mode per port.
| |
Cables and Operating distance: |
10G Base-T Category 6A supports distance of 55m to 100m
1000Base-T Category 5E maximum 50m **
100Base-TX Category 5E maximum 50m **
* Supported link segments up to 100m shall meet the alien crosstalk to insertion loss requirements specified in 55.7.3.1.2 and 55.7.3.2.2 of IEEE802.3an-2006
|
Operating Systems Support:
| Operating system support: | Linux
Windows
FreeBSD
VMware
|
PE210G2i9-T (Back to top)
PE210G2i9-T: General Technical Specifications
| Interface Standard: | PCI-Express Base Specification Revision 2.0 (5 GT/sec) | | Board Size: | Low profile add-in card: 167.65mm X 68.91mm (6.60”X 2.713”) | | PCI Express Card Type: | X8 Lane | | PCI Express Voltage: |
+12V +- 8% | | PCI Connector: | X8 Lane | | Controller: | Intel 82599EB | | Holder: | Metal Bracket | | Operating Humidity: | 0% – 90%, non-condensing | | Operating Temperature: | 0°C – 50°C (32°F - 122°F) | | Storage: | -20°C – 65°C (-4°F – 149°F) | | EMC Certifications: | CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
|
PE210G2i9-T: LED / Connector Specification (Back to top)
| LEDs: |
(2) LEDs per port:
Left LED:
Link of 1Gb/s: Turns on link (yellow)
Link of 10Gb/s: Turns on link (green)
Right LED: Link /ACT :
Turns on link , blinks on activity (green)
| | LEDs location: |
LEDs are located in the top side of the RJ-45
| | Connectors: |
(2) RJ-45 |
Order Information: (Back to top)
| P/N | Description | Notes | | PE210G2i9-T | Dual Copper 10 Gigabit (T) Ethernet PCI Express Server Adapter |
X8, Based on Intel 82599EB, Low-profile, RoHS compliant
|
Note: Model P/N -LP /
-LP: Assemble Low Profile Metal Bracket
1v0
|
