|
PE210G4SPi9-LR - Quad Port Fiber (LR) 10 Gigabit Ethernet
PCI Express Server Adapter Intel® based
Introduction
Key features
Technical Specifications
PE210G4SPi9-LR
PE210G4SPi9-LR: LED / Connector Specifications
Order Information
Download PDF
Introduction
(Back to top)
Silicom’s 10 Gigabit Ethernet PCI Express server adapters are designed for
Servers and high-end appliances. The Silicom 10 Gigabit Ethernet PCI Express
Server adapters offer simple integration into any PCI Express X8 to 10Gigabit
Networks. The performance is optimized so that system I/O is not the bottleneck
in high-performance networking applications.
The Silicom 10 Gigabit Ethernet PCI Express server adapters are based on Intel
82599ES Ethernet controller with two fully integrated Gigabit Ethernet Media
Access Control (MAC) and SFI ports. In addition to managing MAC and PHY Ethernet
layer functions, the controller manages PCI Express packet traffic across its
transaction, link, and physical/logical layers. Using hardware acceleration, the
controller offloads tasks from the host, such as TCP/UDP/IP checksum
calculations and TCP segmentation.
Silicom’s 10 Gigabit Ethernet PCI-Express Server adapters are the ideal solution
for implementing multiple network segments, mission-critical high-powered
networking applications and environments within high performance servers.
Key features
(Back to top)
Fiber 10 Gigabit Ethernet 10GBASE-LR:
• 10 Gigabit Fiber
Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
• 10Gigabit 1310nM Small
form Factor Pluggable (SFP+)
Host Interface
• PCI Express X8 lanes
• Support PCI Express Base Specification 2.0 (5GT/sec)
• Low power
• LC connector
Performance Features:
•
IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
•
Fragmented UDP checksum offload for Packet Reassembly
• CPU utilization- the 82599 supports reduction
in CPU utilization, mainly by supporting Receive Side Coalescing (RSC).
• Support for 16 virtual machine Device Queues ( VMDq) per port
• Support Direct Cache Access ( DCA)
• Advanced memory architecture reduces latency by preceding TSO
packets. A TSO packet may be interleaved with other packets going to the wire
• Minimized device I/O interrupts using MSI and MSI-X
• Offload of TCP / IP / UDP checksum calculation and TCP segmentation
• Large on chip receive packet buffer (512 KB)
• Large on chip transmit packet buffer ( 160KB)
• Supports the VPD (Vital Product Data) capability defined in the PCI
specification ver. 3.0
• Time sync- IEEE1588- Precision Time Protocol (PTP)
• Supports the BCN (Backward Congestion Notification) protocol in
addition to the EEDC functionality
LAN Features:
•
IEEE 802.x flow control support
•
IEEE 802.q VLAN tagging support
• Supports a mode where all received
and sent packets have at least one VLAN tag in addition to the regular tagging
•
IEEE 802.1p layer 2 priority encoding
• Jumbo Frame (up to 16KB)
•
Link Aggregation and Load Balancing
•
RFC2819 RMON MIB statistics
•
TCP Segmentation Offload Up to 256KB
•
Ipv6 Support for IP/TCP Receive Checksum Offload
•
DDP Offload
• LEDs indicators for link/Activity and speed
Security Features:
•
IEEE P802.1AE LinkSec specification. It incorporates an inline packet crypto
unit to support both privacy and integrity checks on a packet by packet basis.
The transmit data path includes both encryption and signing engines. On the
receive data path it includes both decryption and integrity checkers.
• IPsec off load for a given number of flows
• Off-load IPsec for up to 1024 Security associations (SA) for each of
TX and RX
• AH and ESP protocols for authentication and encryption
• AES-128-GMAC and AES-GCM crypto engines
• Transport mode encapsulation
Technical Specifications:
(Back to top)
Fiber 10 Gigabit Ethernet Technical Specifications - (10GBASE-LR) Adapters:
|
IEEE Standard / Network topology: |
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY) |
|
Data Transfer Rate:
|
10.3125GBd |
|
Cables and Operating distance: Up to :
|
Single-Mode: 10000m at 9um |
|
Output Transmit Power:
|
Typical: -4.37 dBm
Minimum: -8.2 dBm
|
|
Optical Receive Sensitivity: |
Typical: -15.47 dBm
Maximum: -14.4 dBm
|
|
Maximum Input Power: |
Maximum: +0.5dBm |
Operating Systems Support:
Operating system support:
|
Linux
Windows
FreeBSD
VMware
|
PE210G4SPi9-LR
(Back to top)
PE210G4SPi9-LR: General Technical Specifications
|
Interface Standard:
|
PCI-Express Base Specification Revision 2.0 (5 GT/s) | |
Board Size:
|
167.64mm x 74.5mm (6.6”X2.935”) | |
PCI Express Card Type:
|
X8 Lane
| |
PCI Express Voltage
|
+12V ± 8%
| |
PCI Connector:
|
X8 Lane
| |
Controller:
|
Intel 82599ES
| |
Holder:
|
Metal Bracket
| |
Weight: |
260 gr (9.17 oz ) | |
Power Consumption: |
18.6 W 1.55 A at 12V: Typical all ports operate at
10Gbit/s.
17.76 W 1.48 A at 12V: Typical No link at all ports
14.76 W 1.23 A at 12V: Typical No SFP+
| |
Operating Humidity:
|
0% – 90%, non-condensing
| |
Operating Temperature:
|
0°C – 50°C (32°F - 122°F)
| |
Storage:
|
-20°C – 65°C (-4°F – 149°F)
|
EMC Certifications:
|
FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per |
PE210G4SPi9-LR: LED / Connector Specifications
(Back to top)
|
LEDs: |
(2) LEDs per port
Left LED: Link/Act :
Turns on link (Green),
Blinks on activity (Green)
Right LED : Link Speed:
Turns on Blue 10G Link.
Turns on Yellow 1G Link
| |
LEDs location: |
LEDs are located on the PCB, visible via holes in the metal bracket.
Each Green Link/Act and LED and Yellow/ Blue Link Speed LED is located
above its own SFP connector port by light pipes | |
Connectors: |
Small Form Factor Pluggable (SFP+) Cage |
Order Information:
(Back to top)
P/N
|
Description |
Note | |
PE210G4SPi9-LR |
Quad Port Fiber (LR) 10 Gigabit Ethernet PCI Express Server Adapter |
X8, Based on Intel 82599ES, on board support for Fiber SR, RoHS
compliant |
Model P/N -LP /
-LP: Assemble Low Profile Metal Bracket
1V1
|
