PE10G1i-T - Single Port Copper 10 Gigabit Ethernet PCI Express Server Adapter Intel® based
Technical Specifications:
Copper Ethernet Technical Specifications - (10GBASE-T) Adapters:
| IEEE Standard / Network topology: |
Copper 10Gigabit Ethernet, 10GBASE-T
Gigabit Ethernet, 1000Base-T |
| Full duplex / Simplex |
Support both Simplex & Full duplex operation in 1000Mbit/sec operating speed, and only Full duplex in 10Gbit/s operating speed |
| Auto negotiation |
Auto-negotiation between Full duplex and simplex in 1Gbit/s operations, and between 10Gb/s and 1000Mb/s
|
| Data Transfer Rate: |
1000 Mbit/s in simplex mode per port.
20Gbit/s and 2000 Mbit/s in full duplex mode per port. |
| Cables and Operating distance: |
10G Base-T Category 6 supports distance of 55m to 100m *
1000Base-T Category 5E maximum 50m **
* Supported link segments up to 100m shall meet the alien crosstalk to insertion loss requirements specified in 55.7.3.1.2 and 55.7.3.2.2 of IEEE802.3an-2006 **theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard |
Operating Systems Support:
| Operating system support: |
Windows |
| Linux |
|
FreeBSD |
|
VMware |
PE10G1i-T: General Technical Specifications
| Interface Standard: |
PCI-Express Base Specification Revision 1.1 |
| Board Size: |
Low profile add-in card: 167.65mm X 68.91mm (6.60”X 2.713”) |
| PCI Express Card Type: |
X8 Lane |
| PCI Express Voltage: |
+3.3V +-9%,
+12V +- 8% |
| PCI Connector: |
X8 Lane |
| Controller: |
Intel 82598EB |
| Holder: |
Metal Bracket |
| Operating Humidity: |
0% – 90%, non-condensing |
| Operating Temperature: |
0°C – 50°C (32°F - 122°F) |
| Storage: |
-20°C – 65°C (-4°F – 149°F) |
| EMC Certifications: |
FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.By 1kHz CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per |
|
