Search
Server Adapters
SETAC Appliances
SETAC Dell Appliances
SETAC Supermicro Appliances
SETAC Supermicro
SETAC Supermicro Modules
SETAC VarioFlex Pyramid Appliances
External Bypass
Home >> SETAC Appliances  >> SETAC Supermicro Appliances >> SETAC Supermicro Modules >> M1E210G6SPi9

M1E210G6SPi9 - Six Port Fiber SFP+ 10 Gigabit Ethernet ExpressModule Server Adapter

description key features technical specifications order info

Silicom SFP+ 10 Gigabit Ethernet ExpressModule Server adapter is PCI-Express X8 Six SFP 10Gigabit Ethernet network interface card that can fit into a 3.5” HD form factor. The Silicom 10 Gigabit Ethernet ExpressModule Server adapter is the front I/O module in Silicom Server to Network Appliance Converter (SETAC) architecture.


Silicom’s SFP+ 10 Gigabit Ethernet ExpressModule server adapters are designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.


The Silicom SFP+ 10 Gigabit Ethernet ExpressModule server adapters are based on Intel 82599ES Ethernet controller with two fully integrated Gigabit Ethernet Media Access Control (MAC) and SFI ports. In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. Using hardware acceleration, the controller offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.


Silicom’s SFP+ 10 Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

SFP+ 10 Gigabit Ethernet:

10Gigabit Ethernet Adapter with SFP cage support

Copper 10SFP+Cu (Passive Direct Attach Cable):

Compliant with the SFP+ MSA SFF-8431 specification

Up to 10 meters

Fiber 10 Gigabit Ethernet 10GBASE-SR:

10BASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+)

Fiber 10 Gigabit Ethernet 10GBASE-LR:

 10BASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+)

 2PortLink synchronization

 Optional SGMII mode (future support)

 

Performance Features:

TCP/UDP Segmentation Offload (256KB in all modes)

TSO Interleaving for Reduced Latency

TCP Receive Side Coalescing (RSC) 32 flows / port

Data Center Bridging (DCB), IEEE Compliance to:

 Priority Groups (up to 8) and Bandwidth Allocation (ETS) IEEE802.1Qaz

 Priority-based Flow Control (PFC) IEEE802.1Qbb

Transmit Rate Scheduler

IPv6 Support for IP/TCP and IP/UDP Receive Checksum Offload

Fragmented UDP Checksum Offload for Packet Reassembly

FCoE Tx / Rx CRC Offload

FCoE Tx / Rx CRC Offload (256 KB)

FCoE Coalescing and Direct Data Placement (512 outstanding Read — Write requests / port)

Message Signaled Interrupts (MSI)

Message Signaled Interrupts (MSI-X)

Interrupt Throttling Control to Limit Maximum Interrupt Rate and Improve CPU Use

Rx Packet Split Header

Multiple Rx Queues (RSS)

Flow Director Filters: up to 32 KB Flows by Hash Filters or up to 8 KB Perfect Match Filters

Number of Rx Queues (128 per port)

Number of Tx Queues (128 per port)

Low Latency Interrupts

DCA Support

TCP Timer Interrupts

Relax Ordering

Rate Control of Low Latency Interrupts

IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload

Fragmented UDP checksum offload for Packet Reassembly

CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC)

Support for 16 virtual machine Device Queues ( VMDq) per port

Support Direct Cache Access ( DCA)

Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other packets going to the wire

Minimized device I/O intterupts using MSI and MSI-X

Offload of TCP / IP / UDP checksum calculation and TCP segmentation

Large on chip receive packet buffer (512 KB)

Large on chip transmit packet buffer ( 160KB)

Supports the VPD (Vital Product Data) capability defined in the PCI specification ver. 3.0

Time sync- IEEE1588- Precision Time Protocol (PTP)

Supports the BCN (Backward Congestion Notification) protocol in addition to the EEDC functionality

 

Virtualization Features:

Support up to 64 Virtual Machine Device Queues (VMDq)

Up to 128 L2 Ethernet MAC Address Filters (unicast and multicast)

Up to 64 L2 VLAN filters

PCI-SIG SR IOV

Multicast and Broadcast Packet Replication

Packet Mirroring

Packet Loopback

Traffic Shaping

 

Security Features:

IEEE P802.1AE LinkSec specification. It incorporates an inline packet crypto unit to support both privacy and integrity checks on a packet by packet basis. The transmit data path includes both encryption and signing engines. On the receive data path it includes both decryption and integrity checkers

IPsec off load for a given number of flows

Off-load IPsec for up to 1024 Security associations (SA) for each of TX and RX

AH and ESP protocols for authentication and encryption

AES-128-GMAC and AES-GCM crypto engines

Transport mode encapsulation

IPv4 and IPv6 versions

 

Common Key features

PCI Express ExpressModule Electromechanical Specification Revision 1.0

Support PCI Express Base Specification 2.0 (2.5 GHz)

IEEE 802.x flow control support

IEEE 802.q VLAN tagging support

Supports a mode where all received and sent packets have at least one VLAN tag in addition to the regular tagging

IEEE 802.1p layer 2 priority encoding

Jumbo Frame (up to 16KB)

Link Aggregation and Load Balancing

RFC2819 RMON MIB statistics

TCP Segmentation Offload Up to 256KB

Ipv6 Support for IP/TCP Receive Checksum Offload

DDP Offload

LEDs indicator for link/Activity

Low-Profile Adapter

Low power

LC connector

SFP+ 10 Gigabit Ethernet Technical Specifications Adapters

SFP+ (Small Form Factor Pluggable) supports:

SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to connect with SFP+ to 10GBase-SR / 10GBase-LR and SFP+ Direct Attach

IEEE Standard / Network topology:

with 10GBase-SR SFP+

Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)

IEEE Standard / Network topology:

with 10GBase-LR SFP+

Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)

IEEE Standard / Network topology:

with 10GSFP+Cu

Copper 10Gigabit Ethernet, 10GSFP+Cu (Direct Attach)

Operating Systems Support
Operating system support: Windows
Linux
VMware
General Technical Specifications
Interface Standard:

PCI Express ExpressModule Electromechanical Spec. Revision 1.0

Silicom SETAC

PCI-Express Base Specification Revision 2.0 ( 5 GT/s)

Board Size:

168.2mm x 98mm (6.62”X3.858”)

PCI Express Card Type: X8 Lane
PCI Express Voltage: +12V +- 8%
PCI Connector: Gold Finger: X8
Controller: :

Intel 82599ES

Holder: Not included
I/O: 8 x SFP+ located on edge of the board
Weight:

180 gr (6.35 oz )

Operating Temperature: -5°C – 45°C (23°F - 133°F)
Storage: -20°C–65°C (-4°F–149°F)
EMC Certifications:

FCC Part 15, Subpart B Class A

Conducted Emissions

Radiated Emissions

CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003

Conducted Emissions

Radiated Emissions

CE EN 55024: 1998 Amendments A1: 2000; A2: 2003

Immunity for ITE Amendment A1: 2001

CE EN 61000-3-2 2000, Class A

Harmonic Current Emissions

CE EN 61000 3-3 1995, Amendment A1: 2001

Voltage Fluctuations and Flicker

CE IEC 6100-4-2: 1995

ESD Air Discharge 8kV. Contact Discharge 4kV.

CE IEC 6100-4-3:1995

Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz

CE IEC 6100-4-4:1995

EFT/B: Immunity to electrical fast transients 1kV Power

Leads, 0.5Kv Signals Leads

CE IEC 6100-4-5:1995

Immunity to conductive surges COM Mode; 2kV,

Dif. Mode 1kV

CE IEC 6100-4-6:1996

Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.

By 1kHz
CE IEC 6100-4-11:1994

Voltage Dips and Short Interruptions

V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs
LEDs:

(2) LEDs per port

Left LED: Link/Act :

Turns on link (Green),

Blinks on activity (Green)

Right LED : Link Speed:

Turns on Blue 10G Link.

Turns on Yellow 1G Link

LEDs location: LEDs are located on the PCB, visible via holes in the metal bracket. Each Green Link/Act and LED and Yellow Link Speed LED is located above its own SFP connector port by light pipes
Connectors: (6) SFP+ cage
P/N Description Notes
M1E210G6SPi9-XR Six Port Fiber SFP+ 10 Gigabit Ethernet ExpressModule Server Adapter

x8 Gen2, ExpressModule,

Based on Intel 82599ES,

Support Direct Attached Copper cable, Support Silicom SFP+ approved transceiver,

RoHS Compliant
M1E210G6SPi9-LR Six Port Fiber (LR) 10 Gigabit Ethernet ExpressModule Server Adapter

x8 Gen2, ExpressModule,

Based on Intel 82599ES,

on board support for Fiber LR, RoHS Compliant
M1E210G6SPi9-SR Six Port Fiber (SR) 10 Gigabit Ethernet ExpressModule Server Adapter

x8 Gen2, ExpressModule,

Based on Intel 82599ES,

on board support for Fiber SR, RoHS Compliant


-C: with canister

Advanced features may require driver software support

1V0
contact us
Download Files
 
  Site Map | Contact | Legal  
       Signed by CDTech - Web Development and Design