Home >> Server Adapters >> Networking Adapters >> Gigabit Ethernet Networking Server Adapters >> PEG6i5

PEG6i5 - Six Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® based

Silicom’s Six Port Copper Gigabit Ethernet PCI Express Server adapter is PCI-Express X8 Copper Gigabit Ethernet network interface card that contain Multiple / Single Gigabit port/s on a PCI-Express adapter.

Silicom’s Six Port Copper Gigabit Ethernet PCI Express Server adapter is designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.

Silicom’s Six Port Copper Gigabit Ethernet PCI Express Server adapter enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team.

Silicom’s Six Port Copper Gigabit Ethernet PCI Express Server adapter has an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

Silicom’s Gigabit Ethernet PCI-Express Server adapter is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

Copper Gigabit Ethernet (1000Base-T) Adapters :
Independently copper Gigabit Ethernet channels support Single Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)	•
Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation	•
Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex	•
RJ-45 female connectors	•

Common Key Features:
Host Interface standard support PCI-Express Base Specification Revision 1.1	•
High performance, reliability, and low power use in Intel 82575 Dual integrated MAC + PHY and SERDES chip Controllers	•
Ultra deep packet buffer per channel lowers CPU utilization	•
Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP	•
Server class reliability, availability and performance features:	•
Link Aggregation and Load Balancing:	•
• Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
• Switch and NIC Independent
• Failover
Priority queuing – 802.1p layer 2 priority encoding	•
Virtual LANs –802.1q VLAN tagging	•
Jumbo Frame (16KB)	•
802.x flow control	•
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)	•
LEDs indicators for link/Activity/Speed status	•

Copper Gigabit Ethernet Technical Specifications - (1000Base-T) Adapters:
IEEE Standard / Network topology:	Gigabit Ethernet, 1000Base-T Fast Ethernet, 100Base-TX Ethernet, 10Base-T
Full duplex / Simplex	Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation:	Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s.
Data Transfer Rate:	1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port. 2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port.
Cables and Operating distance:	10Base-T Category 3, 4, or 5 maximum 100m 100Base-Tx Category 5 maximum 100m 1000Base-T Category 5E maximum 100m
Operating Systems Support
Operating system support:	Windows Linux FreeBSD VMware
General Technical Specifications
Interface Standard:	PCI-Express Base Specification Revision 1.1
Board Size:	Standard height short add-in card 167.64mm X 106.68mm (6.60” X 4.2”)
PCI Express Card Type:	X8 Lane
PCI Express Voltage:	+12V +- 8%
PCI Connector:	Gold Finger: X8
Controller: :	Intel 82575EB
Weight:	170 gr (5.99 oz)
Power Consumption:	13.2W, 1.1A at 12V: Typical all ports operate at 1000Mbit/s. 9W, 0.75A at 12V: Typical all ports operate at 100Mbit/s. 8.4W, 0.7A at 12V: Typical all ports operate at 10Mbit/s. 7.6W, 0.63A at 12V: Typical No link at all ports
Holder:	Metal Bracket : Full Height
Operating Humidity:	0%–90%, non-condensing
Operating Temperature:	0°C – 50°C (32°F - 122°F)
Storage:	-20°C–65°C (-4°F–149°F)
EMC Certifications:	FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF:	110 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 15°C above the system ambient temperature was assumed for the cards components
LEDs
LEDs:	(2) LEDs per port Link / Act: Turn on any Link (1000, 100 or 10) (green) Blinks on Activity (green)
LEDs location:	LEDs are integrated with the RJ-45 connector. Each port has 2 Leds: one in each side: left: link, right: act
Connectors:	(6) Shielded RJ-45

P/N	Description	Notes
PEG6i5-RoHS	Six Port Copper Gigabit Ethernet PCI Express Server Adapter	X8, Based on 82575

Note: Model P/N /-RoHS
-RoHS: RoHS Compliant / Lead free adapter
*Advanced features may required driver development. Specifications details the chips capabilities

1V1

Download Files