The Silicom TAPSF is external passive TAP for 10 /1 fiber Gigabit Ethernet networks. The Silicom TAPSF captures both sides of the Network links and transmits a copy on to the monitor port, this feature enables full duplex monitoring of all packets transmitted between the Network ports.
The Silicom TAPSF does not require power; The Silicom TAPSF can be optionally installed in a rack mount frame.
|
• |
Supports Fiber Gigabit Ethernet (1000Base-SX) |
|
• |
Supports Short Range Fiber 10 Gigabit Ethernet (10GBase-SR) |
|
• |
Passive TAP enables full duplex monitoring for 10 /1 fiber Gigabit Ethernet networks |
|
• |
Transparent to the network |
|
• |
Does not require power |
|
• |
No IP address is needed |
|
• |
Optional 19-inch rack frame holds up to 3 taps |
Figure: 1- TAPSF: Front panel and connections diagram
| |
Fiber 10Gigabit Ethernet, 10Base-SR (850nM)
Fiber Gigabit Ethernet, 1000Base-SX (850nM) |
|
|
Multimode fiber: 50uM |
| |
-70/30:
70% – Network ports to Monitor port
30% – Network port to network port |
|
Network Port: 2.5 dB
Monitor Port: 5.5dB |
|
|
Network Port: 3.25 dB
Monitor Port: 5.0 dB |
|
x 120.5mm ( wide) x 148mm (depth) x 27.7mm (height) (4.744" x 5.827" x 1.07") |
|
610 gram (21.52 oz) |
|
0%–90%, non-condensing |
|
0°C – 50°C (32°F - 122°F) |
|
-20°C–65°C (-4°F–149°F) |
|
Class B |
|
> 50 years |
Figure: 2 - TAP Mode Functional Block Diagram
|
|
|
|
TAPSF-M-R |
10 /1 Gigabit (MM) Fiber TAP Stand Alone Unit |
50uM, Fiber core, splitter ratio 70/30 |
| RK-1U-3 |
Rack mount frame for Silicom stand alone units |
Optional for 19” / 1U frame mount |
Note: Model P/N /-RoHS
-RoHS: RoHS Compliant / Lead free adapter.
1v1